General information
Encoder power supply
Synchronous serial interface
| Signal transmission | RS485 |
| Baud rate | 6.25 Mbit/s |
Ambient conditions
| Temperature | |
| Operation | |
| Nominal | 5 to 40°C |
| Maximum | 55°C |
| Storage | -25 to 55°C |
| Transport | -25 to 70°C |
| Relative humidity | |
| Operation | 5 to 85% |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
物料号:
8AC126.60-1描述:
- EnDat 2.2 encoder interface for installation in ACOPOS servo drives
- Encoder monitoring
- Embedded parameter chip when used with B&R motors
- Backup battery possible
必备附件
EnDat 2.2 cables
| 8BCF0005.1221B-0 | EnDat 2.2 cable, length 5 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
| 8BCF0007.1221B-0 | EnDat 2.2 cable, length 7 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
| 8BCF0010.1221B-0 | EnDat 2.2 cable, length 10 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
| 8BCF0015.1221B-0 | EnDat 2.2 cable, length 15 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
| 8BCF0020.1221B-0 | EnDat 2.2 cable, length 20 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
| 8BCF0025.1221B-0 | EnDat 2.2 cable, length 25 m, 4x 4x 0.14 mm² + 4x 0.35 mm², 12-pin female series 615 signal connector, 9-pin male DSUB servo connector, can be used in cable drag chains |
可选附件
Battery Modules
| 8AXB000.0000-00 | Accessory set for 8AC126.60-1 for encoder buffering consisting of: battery module for lithium battery 3.6 V |
| Automation Studio硬件升级 | 版本（日期） | 下载 |
|---|---|---|
| V3.0 HW Upgrade (8AC126.60-1) | EXE / 3 MB | |
| V4.0 HW Upgrade (8AC126.60-1) | EXE / 3 MB | |
| V6.0 HW Upgrade (8AC126.60-1) | EXE / 559 KB |
| E-CAD（电子或EPLAN模板） | 版本（日期） | 下载 |
|---|---|---|
| ACOPOS EPLAN P8 from V2.4 | EXE / 23 MB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| ACOPOS User´s Manual | PDF / 49 MB | |
| Datasheet 8AC126.60-1 | PDF / 1 MB |
| 证书 | 版本（日期） | 下载 |
|---|---|---|
| ACOPOS KC certificates | ZIP / 601 KB | |
| E225616 UL Certificate of Compliance ACOPOS | PDF / 242 KB | |
| EU Declaration Servos ACOPOS | PDF / 609 KB | |
| UK Declaration Servos ACOPOS | PDF / 109 KB |