8AC125.60-1

General information
Module type ACOPOS plug-in module
B&R ID code 0xACF3
Slot Slots 2, 3 and 4
Power consumption Max. 4.5 W
Certifications
CE Yes
UKCA Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder inputs
Quantity 1
Module-side connection 15-pin female DSUB
Status indicators UP/DN LEDs
Electrical isolation
Encoder - ACOPOS No
Encoder monitoring Yes
Max. encoder cable length 50 m
Encoder power supply
Output voltage Typ. 5 V
Load capacity 250 mA
Sense lines Yes
Sine/Cosine inputs
Signal transmission Differential signals, symmetrical
Signal frequency (-3 dB) DC up to 300 kHz
Signal frequency (-5 dB) DC up to 400 kHz
Differential voltage 0.5 to 1.25 VSS
Common-mode voltage Max. ±7 V
Terminating resistor 120 Ω
Resolution 16384 * Number of encoder lines
Accuracy -
Reference input
Signal transmission Differential signal, symmetrical
Differential voltage for low ≤-0.2 V
Differential voltage for high ≥+0.2 V
Common-mode voltage Max. ±7 V
Terminating resistor 120 Ω
Serial interface
Signal transmission Synchronous
Protocol RS485
Baud rate Depends on the configured functionality
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
物料号:
8AC125.60-1
描述:
  • BiSS encoder interface (Mode C) for installation in ACOPOS servo drives
  • Encoder supply 5 V
  • Encoder monitoring
ACOPOS plug-in module, BiSS/SSI SinCos/SSI interface
Automation Studio硬件升级 版本（日期） 下载
V3.0 Upgrade (8AC125.60-1) EXE / 392 KB
V4.0 HW Upgrade (8AC125.60-1) EXE / 199 KB
V6.0 HW Upgrade (8AC125.60-1) EXE / 560 KB
E-CAD（电子或EPLAN模板） 版本（日期） 下载
ACOPOS EPLAN P8 from V2.4 EXE / 23 MB
文档 版本（日期） 下载
ACOPOS User´s Manual PDF / 49 MB
Datasheet 8AC125.60-1 PDF / 716 KB
证书 版本（日期） 下载
ACOPOS KC certificates ZIP / 601 KB
E225616 UL Certificate of Compliance ACOPOS PDF / 242 KB
EU Declaration Servos ACOPOS PDF / 609 KB
UK Declaration Servos ACOPOS PDF / 109 KB

请选择国家和语言

B&R Logo