8AC122.60-3

Module type	ACOPOS plug-in module
B&R ID code	0xA48B
Slot	Slots 2, 3 and 4
Max. cable length	100 m
Power consumption	Max. 2.5 W
Certifications
CE	Yes
UKCA	Yes
UL	cULus E225616 Power conversion equipment
KC	Yes

Reference output
Output current	Max. 50 mA_eff
Differential voltage	Typ. 3.4 V_eff
Frequency	10 kHz
Signal transmission	Differential signals
Angular position resolution	14 bits/rev
Module-side connection	9-pin female DSUB
Status indicators	UP/DN LEDs
Bandwidth	2.5 kHz
Encoder monitoring	Yes
Accuracy	±8 angular minutes
Electrical isolation
Resolver - ACOPOS	No
Resolver
Input frequency	10 kHz
Input voltage	3 to 7 V_rms
Number of pins	2-pin
Type	BRX
Max. phase shift	±45°
Max. elec. angular error	±10 angular minutes
Nominal transformation ratio	0.5 ±10%
Sine/Cosine inputs
Input impedance at 10 kHz (per pin)	10.4 kΩ - j 11.1 kΩ
Signal transmission	Differential signals
Encoder-ACOPOS electrical isolation	No, common-mode voltage on the sine/cosine inputs max. ±20 V

8AC122.60-3

ACOPOS plug-in module, resolver interface 10 kHz

8CR005.12-1	Resolver cable, length 5 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR007.12-1	Resolver cable, length 7 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR010.12-1	Resolver cable, length 10 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR015.12-1	Resolver cable, length 15 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR020.12-1	Resolver cable, length 20 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains
8CR025.12-1	Resolver cable, length 25 m, 3x 2x 24 AWG (19x 0.127), 12-pin female Intercontec resolver connector, 9-pin male DSUB servo connector, can be used in cable drag chains

E-CAD（电子或EPLAN模板）	版本（日期）	下载
ACOPOS EPLAN P8 from V2.4		EXE / 23 MB 下载登录

M-CAD（机械模板）	版本（日期）	下载
3D file STEP 8AC122.60-x		ZIP / 116 KB 下载登录

文档	版本（日期）	下载
ACOPOS User´s Manual		PDF / 49 MB 下载登录
Datasheet 8AC122.60-3		PDF / 932 KB 下载登录

证书	版本（日期）	下载
ACOPOS KC certificates		ZIP / 601 KB 下载登录
E225616 UL Certificate of Compliance ACOPOS		PDF / 242 KB 下载登录
EU Declaration Servos ACOPOS		PDF / 609 KB 下载登录
UK Declaration Servos ACOPOS		PDF / 109 KB 下载登录