Short description
Stepper motor | Stepper motor flange size 87.1 mm, length 130 mm |
General information
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cURus E136406 Incomplete rotating machines and rotating machine parts - Component |
Specific motor data
Wiring | |
Serial |
|
Parallel |
|
Current | |
Series wiring | - |
Parallel wiring | 10 A |
Resistance/Phase | |
Series wiring | - |
Parallel wiring | 0.24 Ω |
Inductance/Phase | |
Series wiring | - |
Parallel wiring | 1.6 mH |
Stall torque | 9.3 Nm |
Holding torque | 13.6 Nm |
Detent torque | <420 mNm |
Rotor inertia | Approx. 3.92 kgcm2 |
General motor data
Protection class | IP40 |
Stepping angle | 1.8° |
Max. surface temperature | 100°C |
Average period of operation between failures | 20,000 hours |
Cable length | 300 mm |
Cable cross section | 22 AWG, UL 3266 |
Shaft type | With key |
Insulation class | B (130°C) |
Insulation resistance | 100 MΩ min. 500 VDC |
Dielectric resistance | 1776 VAC for 1 minute |
Driver supply voltage | Max. 80 VDC |
Ambient conditions
Temperature | |
Operation | -20 to 40°C |
Storage | -30 to 85°C |
Transport | -30 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
物料号:
80MPH6.101S000-01描述:
2-phase hybrid stepper motor, 87.1 mm flange, length 130 mm, 10 A parallel, 13.6 Nm holding torque, 9.3 Nm stall torque
可选附件
Accessories
80XMPHXRE.W1-10 | IP expansion and wiring clamp for stepper motors in the 80MPH series, IP65, 10 units per package |