Short description
Potential distributor module | 5x 24 VDC on the terminals, 5x ground on the terminals |
General information
Input power supply
Nominal input voltage | 24 VDC -15% / +20% external, ground external |
Fuse | Integrated 6.3 A, slow-blow, can be replaced |
Reverse polarity protection | No |
Output power supply
Nominal output voltage | 24 VDC, ground |
Permissible contact load | 10 A |
Behavior on short circuit | |
On 24 VDC power supply | Integrated fuse |
On GND power supply | No protection available |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
![](/fileadmin/X20PD0016.right-f04b74b5.jpg)
物料号:
X20PD0016描述:
- Integrated exchangeable microfuse
- Monitoring of the fuse
- Potential for routing as needed
- Distribution of the load and electronics supply
- Isolation from the internal I/O supply
The potential distributor module provides 5x 24 VDC and 5x ground connections (from an external supply) at the terminals. There is no connection to the internal I/O supply, so this module only serves to distribute an external supply for the load and electronics supply. The externally fed 24 VDC supply is provided on the terminal connections through a replaceable microfuse. The 24 VDC feed and the functionality of the fuse are monitored.
必备附件
Automation Studio硬件升级 | 版本(日期) | 下载 |
---|---|---|
V2.6 HW Upgrade (X20PD0016) | EXE / 1 MB | |
V3.0 HW Upgrade (X20PD0016) | EXE / 1 MB | |
V4.0 HW Upgrade (X20PD0016) | EXE / 686 KB |
E-CAD(电子或EPLAN模板) | 版本(日期) | 下载 |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD(机械模板) | 版本(日期) | 下载 |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |
文档 | 版本(日期) | 下载 |
---|---|---|
Datasheet X20PD0016 | PDF / 177 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |