Short description
mapp Technology | 1TGMPSAFETYX.00-01 B&R software license |
General information
System requirements | |
Automation Studio | 4.2.5 or later |
Automation Runtime | Min. F4.25 |
SafeDESIGNER | 4.2.3 or later |
Safety Release | 1.10 or later |
Single-user license | Runtime license |
Alternative package license | mapp flat-rate 1TGMPFLAT.02 |
Behavior if license missing | Solid red LED indicates license violation |
Diagnostics | Via Automation Studio (SDM, Logger, etc.) |
Certifications | |
Functional safety |
IEC 61508:2010, SIL 3 EN 62061:2005/A2:2015, SIL 3 EN ISO 13849-1:2015, Cat. 4 / PL e IEC 61511:2004, SIL 3 |
Scope of software license
Included library | MpSafetyX |
Properties and functions | |
Tracing variable values | No |
Dynamic variable assignment | No |
Recordings | No |
Data archival | None |
Data exchange |
Secure data exchange between HMI elements and the SafeLOGIC controller over 2 communication channels. |
Modular software concepts | Supported |
Web-based diagnostics | Yes |
XML configuration | Yes |
Use cases |
- Safe mode selector switch - Safe limit value |
![](/fileadmin/MpSafetyX-9abd4df6.jpg)
物料号:
1TGMPSAFETYX.00-01描述:
- User interface for VC4-based HMI applications
- For up to 8 SafeBOOL or 8 SafeINT parameters
- For single-choice or multiple-choice applications
Component mapp SafeOPTION or MpSafetyX provides secure data exchange between HMI elements and the SafeLOGIC controller. This makes it possible to transfer safety-related parameters from the HMI application to the safety application. Typical use cases include selecting an operating mode or defining limit or threshold values.
One "OptionManager" function block is supported per SafeLOGIC controller during configuration in Automation Studio. Up to 16 option function blocks can then be used per "OptionManager" function block. The following option function blocks are available:
- MpSafetyXOptionIntUI: This function block can be used to configure up to 8 SafeBOOL parameters. Either "Multiple-choice" or "Single-choice" mode is possible.
- MpSafetyXOptionBoolUI: This function block can be used to configure up to 8 SafeINT parameters.
Suitable function blocks for configuration in SafeDESIGNER are included in library "SafeOPTION_SF".
必备附件
Technology Guard
0TG1000.01 | Technology Guard (MSD) |
0TG1000.02 | Technology Guard (HID) |
文档 | 版本(日期) | 下载 |
---|---|---|
Data sheet MpSafetyX | PDF / 3 MB |