You will get an overview of machine vision, including the basics, vision functions, and configuration in Automation Studio and the HMI application.
Using a fill level application as an example, you will learn how a camera placed in front of bottles on a track system can check if the fill level and labelling information are correct.
Module 1 | Introduction and first steps with machine vision |
|---|---|
Module 2 | Configuration and use of alignment |
Further information is provided below.
Module 1:
Introduction and first steps with machine vision
Introduction and first steps with machine vision
Description | The course starts with an introduction to machine vision, covering the basics of optics and B&R hardware topology options. It then guides you through setting up the vision application and implementing and configuring vision functions. Content:
|
|---|---|
Target group | Advanced Automation Studio users who are interested in configuring vision functions and commissioning a camera in a machine application |
Requirements |
|
Topic duration | About 4 hours |
Hardware used | The vision application can be tested without the need of a camera. The course will provide you with photos. The online course is based on following hardware:
|
Software used |
|
Module 2:
Configuration and use of alignment
Configuration and use of alignment
Description | The course starts with an explanation of what alignment is and its functional principle. It then guides you through configuring the alignment source and connecting the alignment receiver, followed by conducting tests with the offline HMI. Content:
|
|---|---|
Target group | Experienced Automation Studio users who are interested in the intelligent configuration of two or more interacting vision functions |
Requirements |
|
Topic duration | About 3 hours |
Hardware used | The vision application can be tested without the need of a camera. The course will provide you with photos. The online course is based on following hardware:
|
Software used | Automation Studio version 4.12mapp Technology >= 5.24
|