Short description
Stepper motor | Stepper motor flange size 87.1 mm, length 160 mm |
General information
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cURus E360421 Servo and stepper motors - Component |
Specific motor data
Wiring | Parallel |
Current | 10 A |
Resistance/Phase | 0.24 Ω |
Inductance/Phase | 1.6 mH |
Stall torque | 9.3 Nm |
Holding torque | 13.6 Nm |
Detent torque | <420 mNm |
Rotor inertia | Approx. 3.92 kgcm2 |
General motor data
Stepping angle | 1.8° |
Max. surface temperature | 100°C |
Average period of operation between failures | 20,000 hours |
Shaft type | With key |
Insulation class | B (130°C) |
Insulation resistance | 25 MΩ min. 500 VDC |
Dielectric resistance | 1.63 kVDC for 1 minute |
Driver supply voltage | Max. 80 VDC |
Ambient conditions
Temperature | |
Operation | -20 to 40°C |
Storage | -20 to 85°C |
Transport | -20 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Malzeme numarası:
80MPH6.101S100-01Açıklama:
2-phase hybrid stepper motor, 87.1 mm flange, length 160.5 mm, 10 A parallel, 13.6 Nm holding torque, 9.3 Nm stall torque
Dökümantasyon | Sürüm (Tarih) | İndirme |
---|---|---|
Stepper motors user's manual | PDF / 49 MB |
Sertifikalar | Sürüm (Tarih) | İndirme |
---|---|---|
E360421 UL Certificate of Compliance 80MPH | PDF / 113 KB | |
EU Declaration Motors Hybrid | PDF / 166 KB | |
UK Declaration Motors Hybrid | PDF / 135 KB |