Short description
Communication module | 1x RS232/RS422/RS485, 1x PROFIBUS DP slave |
General information
B&R ID code | 0xB0BC |
Status indicators | Data transfer per interface |
Diagnostics | |
Data transfer | Yes, using LED status indicators |
Electrical isolation | |
PLC - IF1 | No |
PLC - IF2 | Yes |
PLC - IF3 | Yes |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E115267 Industrial control equipment |
Interfaces
Interface IF1 | |
Type | RS232 |
Variant | 9-pin DSUB connector (shared with IF2) |
Input filter / Protective circuit | Yes |
Max. distance | 15 m / 19,200 bit/s |
Max. transfer rate | 115.2 kbit/s |
Network-capable | No |
FIFO buffer | 16 bytes in the transmit and receive directions |
Handshake lines | RTS, CTS |
Controller | UART type 16C550 compatible |
Data formats | |
Data bits | 5 to 8 |
Parity | Yes / No / Even / Odd |
Stop bits | 1 / 2 |
Interface IF2 | |
Type | RS485/RS422 |
Variant | 9-pin DSUB connector (shared with IF1) |
Max. distance | 500 m |
Max. transfer rate | 115.2 kbit/s |
Network-capable | Yes |
FIFO buffer | 16 bytes in the transmit and receive directions |
Terminating resistor | Integrated in module, switchable |
Controller | UART type 16C550 compatible |
Interface IF3 | |
Fieldbus | PROFIBUS DP slave |
Type | RS485 |
Variant | 9-pin female DSUB connector |
Controller | ASIC SPC3 |
RAM | 1.5 kB |
Max. distance | 1000 m |
Max. transfer rate | 12 Mbit/s |
Network-capable | Yes |
Bus terminating resistor | Integrated in module |
Max. transfer rate | |
Bus length ≤100 m | 12 Mbit/s |
Bus length ≤200 m | 1.5 Mbit/s |
Bus length ≤400 m | 500 kbit/s |
Bus length ≤1000 m | 187.5 kbit/s |
Operating conditions
Degree of protection | IP20 |
Ambient conditions
Temperature | |
Operation | 0 to 50°C |
Storage | -25 to 70°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 10 to 90%, non-condensing |
Storage | 10 to 90%, non-condensing |
Transport | 10 to 90%, non-condensing |
Mechanical properties
Weight | 65 g |
Slot | Slot in PP65 |
Torque for mounting screw | Max. 0.6 Nm |
Malzeme numarası:
4PP065.IF24-1Açıklama:
PP65 interface module, 1 PROFIBUS DP slave interface electrically isolated and network-capable, 1 RS232 interface, 1 RS422/RS485 interface, RS422/RS485: Electrically isolated and network-capable, RS232/RS422/RS485 designed in one connector
İsteğe bağlı aksesuarlar
Infrastructure components
0G1000.00-090 | Bus connector, RS485, for PROFIBUS networks |
Automation Studio donanım yükseltmeleri | Sürüm (Tarih) | İndirme |
---|---|---|
V3.0 HW Upgrade (4PP065.IF24-1) | EXE / 631 KB | |
V4.0 HW Upgrade (4PP065.IF24-1) | EXE / 487 KB |
Dökümantasyon | Sürüm (Tarih) | İndirme |
---|---|---|
Data sheet 4PP065.IF24-1 | PDF / 384 KB | |
Power Panel 65 User's manual | PDF / 5 MB |
E-CAD (Elektro veya EPLAN şablonları) | Sürüm (Tarih) | İndirme |
---|---|---|
Panel EPLAN P8 from V2.4 | EXE / 67 MB |
Fieldbus ekipman açıklama dosyaları | Sürüm (Tarih) | İndirme |
---|---|---|
4PP065.IF24-1 GSD package | ZIP / 5 KB |
M-CAD (Mechan. Şablonlar) | Sürüm (Tarih) | İndirme |
---|---|---|
3D file DXF/STEP 4PP065.IFxx-1 | ZIP / 2 MB |
Sertifikalar | Sürüm (Tarih) | İndirme |
---|---|---|
UL61010-1 Certificate of Compliance C70, T30 Series | PDF / 336 KB |