8AC130.60-1

General information
Module type ACOPOS plug-in module
B&R ID code 0x1068
Slot Slots 3 and 4
Power consumption Max. 0.8 W
Certifications
CE Yes
UKCA Yes
UL cULus E225616
Power conversion equipment
KC Yes
Inputs/Outputs
Module-side connection 12-pin multipoint connector
Status indicators LED status indicator (24 V)
Configuration of digital inputs/outputs Configurable in pairs as inputs or outputs
Incremental encoders
Counter size 16-bit
Input frequency Max. 62.5 kHz
Evaluation 4x
Signal form Square wave pulse
Encoder monitoring No
Counter frequency Max. 250 kHz
Reference frequency Max. 62.5 kHz
Distance between edges Min. 2.5 µs
Inputs
Input 1 Channel A
Input 2 Channel B
Input 3 Reference pulse R
Power supply
Voltage monitoring (24 V - LED) Yes, supply voltage >18 V
Reverse polarity protection Yes
Power supply
Minimum 18 VDC
Nominal 24 VDC
Maximum 30 VDC
Digital inputs
Quantity Max. 8
Circuit Sink
Switching threshold
Low <5 V
High >15 V
Input voltage
Nominal 24 VDC
Maximum 30 VDC
Input current at nominal voltage
Channel 1-4 Approx. 10 mA
Channel 5-8 Approx. 5.5 mA
Electrical isolation
Channel - ACOPOS Yes
Channel - Channel No
Switching delay
Channel 1-4 Max. 5 µs
Channel 5-8 Max. 35 µs
Event counters
Signal form Square wave pulse
Input frequency Max. 100 kHz
Counter size 16-bit
Inputs
Input 1 Counter 1
Input 2 Counter 2
Digital outputs
Quantity Max. 10
Readable outputs Yes
Continuous current
Outputs 1 - 4 Max. 100 mA
Outputs 5 - 8 Max. 400 mA
Outputs 9 - 10 Max. 2 A
Short-circuit current at 24 V (until cutoff)
Outputs 1 - 4 Approx. 1 A
Outputs 5 - 8 Approx. 1.2 A
Outputs 9 - 10 Approx. 24 A
Electrical isolation
Output - ACOPOS Yes
Output - Output No
Switching frequency (resistive load)
Outputs 1 - 2 Max. 10 kHz
Outputs 3 - 4 Max. 10 kHz
Outputs 5 - 8 Max. 5 kHz
Outputs 9 - 10 Max. 100 Hz
Switching voltage
Minimum 18 VDC
Nominal 24 VDC
Maximum 30 VDC
Switching delay 0 → 1 and 1 → 0
Outputs 1 - 4 Max. 5 µs
Outputs 5 - 8 Max. 50 µs
Outputs 9 - 10 Max. 500 µs
Protection
Short-circuit proof Yes
Overload-proof Yes
Type
Outputs 1 - 4 Push-Pull transistor outputs
Outputs 5 - 10 High-side transistor outputs
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Materialnummer:
8AC130.60-1
Beskrivning:
  • Digital mixed module for installation in ACOPOS servo drives
  • Maximum of 8 digital inputs or 10 digital outputs
  • I/O configurable in pairs as inputs or outputs
  • Incremental encoder functionality (A, B, R)
  • Incremental encoder emulation
ACOPOS plug-in module, 8 digital I/O configurable in pairs as 24 V inputs or outputs 400/100 mA, 2 digital outputs 2 A, order terminal block TB712 separately!
Obligatoriska tillbehör
Terminal blocks
7TB712.9 Accessory terminal block, 12-pin, screw clamp terminal block 1.5 mm²
7TB712.91 Accessory terminal block, 12-pin, cage clamp terminal block 1.5 mm²
Automation Studio HW uppdateringar Version (datum) Ladda ner
V4.0 HW Upgrade (8AC130.60-1) EXE / 192 KB
V6.0 HW Upgrade (8AC130.60-1) EXE / 553 KB
Certifikat Version (datum) Ladda ner
ACOPOS KC certificates ZIP / 601 KB
E225616 UL Certificate of Compliance ACOPOS PDF / 242 KB
EU Declaration Servos ACOPOS PDF / 609 KB
UK Declaration Servos ACOPOS PDF / 109 KB
Dokumentation Version (datum) Ladda ner
ACOPOS User´s Manual PDF / 49 MB
Datasheet 8AC130.60-1 PDF / 790 KB
E-CAD (Electro eller EPLAN mallar) Version (datum) Ladda ner
ACOPOS EPLAN P8 from V2.4 EXE / 23 MB
M-CAD (Mechan. mallar) Version (datum) Ladda ner
3D Datei STEP 8AC130.60-x ZIP / 183 KB

Välj land och språk

B&R Logo