Short description
I/O module | 8 digital outputs 24 VDC |
General information
B&R ID code | 0x2658 |
Status indicators | I/O function per channel, actuator power supply per channel, supply voltage, bus function |
Diagnostics | |
Outputs | Yes, using LED status indicator and software |
Actuator power supply | Yes, using LED status indicator and software |
I/O power supply | Yes, using LED status indicator and software |
Connection type | |
X2X Link | M12, B-coded |
Outputs | 8x M12, A-coded |
I/O power supply | M8, 4-pin |
Power consumption | |
Internal I/O | 1.7 W |
X2X Link power supply | 0.75 W |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
I/O power supply
Digital outputs
Quantity | 8 |
Variant | Current-sourcing FET |
Nominal voltage | 24 VDC |
Switching voltage | I/O power supply minus residual voltage |
Nominal output current | 2 A |
Total nominal current | 8 A |
Output circuit | Source |
Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
Actuator power supply | |
Actuator current | 0.1 A |
Total nominal current | 0.5 A |
Diagnostic status | Output monitoring with 10 ms delay |
Leakage current when the output is switched off | 5 µA |
Switching on after overload shutdown | Approx. 10 ms (depends on the module temperature) |
Residual voltage | <0.5 V at 2 A nominal current |
Peak short-circuit current | <21 A |
Switching delay | |
0 → 1 | <250 µs |
1 → 0 | <270 µs |
Switching frequency | |
Resistive load | Max. 100 Hz |
Braking voltage when switching off inductive loads | 50 VDC |
Actuator power supply
Voltage | I/O power supply minus voltage drop for short-circuit protection |
Voltage drop for short-circuit protection at 500 mA | Max. 2 VDC |
Summation current | Max. 0.5 A |
Short-circuit proof | Yes |
Electrical properties
Electrical isolation |
Channel isolated from bus Channel not isolated from channel
|
Operating conditions
Mounting orientation | |
Any | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP67 |
Ambient conditions
Temperature | |
Operation | -25 to 60°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Mechanical properties
Dimensions | |
Width | 53 mm |
Height | 155 mm |
Depth | 42 mm |
Weight | 330 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |
Materialnummer:
X67DO9332.L12Beskrivning:
- 8 digital outputs
- Outputs can handle up to 2 A
- Node number switches for setting the X2X Link address
- 1:1 replacement for passive distributors
- All outputs with single-channel diagnostics
- Extensive additional status information
The module is a digital output module with 8 channels. The outputs can be loaded with up to 2 A. The summation current is 8 A.
The node number switches for setting the X2X Link address are a unique feature. When modular machine configurations change, it is required, for example, to define certain module groups at a fixed address that is independent of the preceding modules in the line. All subsequent standard modules refer to this offset and use it automatically for addressing purposes.
Automation Studio HW uppdateringar | Version (datum) | Ladda ner |
---|---|---|
V2.6 HW Upgrade (X67DO9332.L12) | EXE / 413 KB | |
V3.0 HW Upgrade (X67DO9332.L12) | EXE / 412 KB | |
V4.0 HW Upgrade (X67DO9332.L12) | EXE / 284 KB |
Dokumentation | Version (datum) | Ladda ner |
---|---|---|
Datasheet X67DO9332.L12 | PDF / 418 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X67 System User´s Manual | PDF / 6 MB |
E-CAD (Electro eller EPLAN mallar) | Version (datum) | Ladda ner |
---|---|---|
X67 EPLAN P8 from V2.4 | EXE / 105 MB |
M-CAD (Mechan. mallar) | Version (datum) | Ladda ner |
---|---|---|
3D File DXF/STEP X67 High Density | ZIP / 705 KB |