X20HB8884

Short description

POWERLINK compact link selector	Connects POWERLINK devices to a redundant POWERLINK network

General information

Status indicators	Module status, bus function
Diagnostics
Module status	Yes, using LED status indicator
Bus function	Yes, using LED status indicator
Power consumption	2 W
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC	Yes

Interfaces

Type	POWERLINK compact link selector
Variant	2x shielded RJ45
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Transfer
Physical layer	100BASE-TX
Half-duplex	Yes
Full-duplex	No
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Hub propagation delay	0.96 to 1 µs

Electrical properties

Electrical isolation	Power supply isolated from POWERLINK (IF1 and IF2)

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately. Order 1x power supply module X20PS8002 separately. Order 1x hub expansion module X20HB2880 or 2x hub expansion module X20HB2885. Order 1x bus base X20BB81 or X20BB82 separately.
Pitch
X20BB81	62.5^+0.2 mm
X20BB82	87.5^+0.2 mm

Materialnummer:

X20HB8884

Beskrivning:

Connecting POWERLINK devices to the POWERLINK cable redundancy system
Integrated compact link selector function

POWERLINK is a standard protocol for Fast Ethernet with hard real-time properties. The Ethernet POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed. www.ethernet-powerlink.org

Systems with redundant cabling can be implemented easily using POWERLINK. Unlike ring redundancy, cable redundancy does not require cable looping, which can sometimes be problematic. This allows the creation of all types of tree structures. When using a device with the link selector function, data is always transferred via the highest quality network lines. The link selector function is integrated in the module compact link selector. This makes it easy to connect any POWERLINK device to a redundant POWERLINK network.

Vidare information:

Technology information: Redundancy

User's manual: Redundancy for control systems

Obligatoriska tillbehör

System modules for X20 redundancy systems

X20HB2885	X20 hub expansion module, integrated active 2-port hub, 2x RJ45

System modules for expandable bus controllers

X20BB81	X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, with one expansion slot for X20 add-on module (IF, HB, etc.), X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20BB82	X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, with 2 expansion slots for 2 X20 add-on modules (IF, HB, etc.), X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included

System modules for the X20 hub system

X20HB2880	X20 hub expansion module, integrated 2-port hub, 2x RJ45
X20PS8002	X20 power supply module, for standalone hub and compact link selector

Terminal blocks

X20TB12	X20 terminal block, 12-pin, 24 VDC keyed

Automation Studio HW uppdateringar	Version (datum)	Ladda ner
V4.0 HW Upgrade (X20HB8884)		EXE / 890 KB Inloggning för nedladdning

Certifikat	Version (datum)	Ladda ner
244665 CSA HazLoc CoC X20, X67		PDF / 158 KB Inloggning för nedladdning
ABS Certificate of Product Design Assessment - X20 IO Series		PDF / 2 MB Inloggning för nedladdning
BV Type Approval Certificate - X20		PDF / 556 KB Inloggning för nedladdning
CCS Type Approval Certificate - X20		PDF / 285 KB Inloggning för nedladdning
Compass Safe Distance Certificate - X20		PDF / 1 MB Inloggning för nedladdning
DNV Type Approval Certificate - X20		PDF / 194 KB Inloggning för nedladdning
E115267 UL CoC X20		PDF / 1 MB Inloggning för nedladdning
EU Declaration ATEX X20		PDF / 218 KB Inloggning för nedladdning
EU Declaration of conformity PLC X20		PDF / 169 KB Inloggning för nedladdning
FTZU 09 ATEX 0083X		PDF / 771 KB Inloggning för nedladdning
KR Type Approval Certificate MIL39390-AC003 (X20 System)		PDF / 758 KB Inloggning för nedladdning
Lloyds Register		PDF / 502 KB Inloggning för nedladdning
RINA Type Approval Certificate - X20 / Power Panel T30		PDF / 1 MB Inloggning för nedladdning
UK Declaration PLC X20		PDF / 151 KB Inloggning för nedladdning
X20, X67 KC certificates		PDF / 6 MB Inloggning för nedladdning

Dokumentation	Version (datum)	Ladda ner
Datasheet X20(c)HB8884		PDF / 1 MB Inloggning för nedladdning
Installation- / EMC-Guide		PDF / 20 MB Inloggning för nedladdning
Redundancy for control systems		PDF / 9 MB Inloggning för nedladdning
X20 Package leaflet ATEX/CSA		PDF / 2 MB Inloggning för nedladdning
X20 System User´s Manual		PDF / 7 MB Inloggning för nedladdning

E-CAD (Electro eller EPLAN mallar)	Version (datum)	Ladda ner
X20 EPLAN P8 from V2.4		EXE / 160 MB Inloggning för nedladdning

M-CAD (Mechan. mallar)	Version (datum)	Ladda ner
3D File STEP/DXF X20BC and X20IF Module		ZIP / 1 MB Inloggning för nedladdning