SATA 1.0, PIO mode 0-4, multiword DMA mode 0-2, UDMA 0-5
Data transfer rate
Internal
Max. 84.6 Mbit/s
To/From host
Max. 150 MB/s
Positioning time
Minimum (track to track)
1.5 ms
Nominal (read access)
12 ms
Maximum (read access)
22 ms
Electrical properties
Power consumption
0.3 A at 3.3 V (PCI bus) 1 A at 5 V (PCI bus)
Ambient conditions
Temperature
Operation
-15 to 80°C
24-hour operation
-15 to 80°C
Storage
-40 to 95°C
Transport
-40 to 95°C
Relative humidity
Operation
8 to 90%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Vibration
Operation (continuous)
5 to 500 Hz: Max. 0.125 g, duration 1 octave per minute, no unrecoverable errors
Operation (occasional)
5 to 500 Hz: Max. 0.25 g, duration 1 octave per minute, no unrecoverable errors
Storage
5 to 500 Hz: Max. 5 g, duration 0.5 octaves per minute, no damage
Transport
5 to 500 Hz: Max. 5 g, duration 0.5 octaves per minute, no damage
Shock
Operation
Max. 125 g, 2 ms, no unrecoverable errors
Storage
Max. 400 g, 2 ms, no damage Max. 450 g, 1 ms, no damage Max. 200 g, 0.5 ms, no damage
Transport
Max. 400 g, 2 ms, no damage Max. 450 g, 1 ms, no damage Max. 200 g, 0.5 ms, no damage
Elevation
Operation
-300 to 3048 m
Storage
-300 to 12192 m
Mechanical properties
Installation
Permanent
Dimensions
Width
70 mm
Length
100 mm
Height
9.5 mm
Weight
350 g
Vendor information
Manufacturer
Fujitsu
Manufacturer's product ID
M120-ESW MHY2160BH-ESW
Materialnummer:
5ACPCI.RAIC-03
Beskrivning:
SATA RAID controller
RAID level 0 (striped) and 1 (mirrored)
2 SATA hard disk drives (suitable for 24-hour operation)
Only requires 1 PCI slot
Transfer rates up to 150 MB/s
This SATA RAID controller supports RAID level 0 and 1 and can be inserted in a PCI slot. The hard disks being used are specified for 24-hour operation and also feature an extended temperature range.