Short description
Stepper motor | Stepper motor flange size 56.4 mm, length 57.5 mm |
General information
Certifications | |
CE | Yes |
UKCA | Yes |
Specific motor data
General motor data
Protection class | IP30 |
Stepping angle | 1.8° |
Max. surface temperature | 100°C |
Average period of operation between failures | 21,000 hours |
Cable length | 300 mm |
Cable cross section | 22 AWG, UL 3266 |
Shaft type | Flat-sided shaft (D-cut) |
Insulation class | B (130°C) |
Insulation resistance | 100 MΩ min. 500 VDC |
Dielectric resistance | 500 VAC for 1 minute |
Driver supply voltage | Max. 80 VDC |
Ambient conditions
Temperature | |
Operation | -20 to 40°C |
Storage | -30 to 85°C |
Transport | -30 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Номер модель:
80MPD3.300S000-01Описание:
2-phase hybrid stepper motor, 56.4 mm flange, length 57.5 mm, 3 A serial / 6 A parallel, 1.8 Nm holding torque, 1.25 Nm stall torque
Дополнительные аксессуары
Accessories
80XMPDXRE.W1-10 | IP expansion and wiring clamp for stepper motors in the 80MPD and 80MPF series, IP65 for 80MPD motors and 80MPF motors, 10 units per package |
Документация | Версия (Дата) | Загрузка |
---|---|---|
Stepper motors user's manual | PDF / 49 МБ |
Сертификаты | Версия (Дата) | Загрузка |
---|---|---|
EU Declaration Motors Hybrid | PDF / 166 кБ | |
UK Declaration Motors Hybrid | PDF / 135 кБ |