Short description
I/O module | 8 digital outputs 24 VDC |
General information
B&R ID code | 0x2658 |
Status indicators | I/O function per channel, actuator power supply per channel, supply voltage, bus function |
Diagnostics | |
Outputs | Yes, using LED status indicator and software |
Actuator power supply | Yes, using LED status indicator and software |
I/O power supply | Yes, using LED status indicator and software |
Connection type | |
X2X Link | M12, B-coded |
Outputs | 8x M12, A-coded |
I/O power supply | M8, 4-pin |
Power consumption | |
Internal I/O | 1.7 W |
X2X Link power supply | 0.75 W |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
I/O power supply
Digital outputs
Quantity | 8 |
Variant | Current-sourcing FET |
Nominal voltage | 24 VDC |
Switching voltage | I/O power supply minus residual voltage |
Nominal output current | 2 A |
Total nominal current | 8 A |
Output circuit | Source |
Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
Actuator power supply | |
Actuator current | 0.1 A |
Total nominal current | 0.5 A |
Diagnostic status | Output monitoring with 10 ms delay |
Leakage current when the output is switched off | 5 µA |
Switching on after overload shutdown | Approx. 10 ms (depends on the module temperature) |
Residual voltage | <0.5 V at 2 A nominal current |
Peak short-circuit current | <21 A |
Switching delay | |
0 → 1 | <250 µs |
1 → 0 | <270 µs |
Switching frequency | |
Resistive load | Max. 100 Hz |
Braking voltage when switching off inductive loads | 50 VDC |
Actuator power supply
Voltage | I/O power supply minus voltage drop for short-circuit protection |
Voltage drop for short-circuit protection at 500 mA | Max. 2 VDC |
Summation current | Max. 0.5 A |
Short-circuit proof | Yes |
Electrical properties
Electrical isolation |
Channel isolated from bus Channel not isolated from channel
|
Operating conditions
Mounting orientation | |
Any | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP67 |
Ambient conditions
Temperature | |
Operation | -25 to 60°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Mechanical properties
Dimensions | |
Width | 53 mm |
Height | 155 mm |
Depth | 42 mm |
Weight | 330 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |
Номер модель:
X67DO9332.L12Описание:
- 8 digital outputs
- Outputs can handle up to 2 A
- Node number switches for setting the X2X Link address
- 1:1 replacement for passive distributors
- All outputs with single-channel diagnostics
- Extensive additional status information
The module is a digital output module with 8 channels. The outputs can be loaded with up to 2 A. The summation current is 8 A.
The node number switches for setting the X2X Link address are a unique feature. When modular machine configurations change, it is required, for example, to define certain module groups at a fixed address that is independent of the preceding modules in the line. All subsequent standard modules refer to this offset and use it automatically for addressing purposes.
E-CAD (Electro или EPLAN шаблоны) | Версия (Дата) | Загрузка |
---|---|---|
X67 EPLAN P8 from V2.4 | EXE / 105 МБ |
M-CAD (Механические Шаблоны | Версия (Дата) | Загрузка |
---|---|---|
3D File DXF/STEP X67 High Density | ZIP / 705 кБ |
Документация | Версия (Дата) | Загрузка |
---|---|---|
Datasheet X67DO9332.L12 | PDF / 418 кБ | |
Installation- / EMC-Guide | PDF / 20 МБ | |
X67 System User´s Manual | PDF / 6 МБ |
Обновление Automation Studio HW | Версия (Дата) | Загрузка |
---|---|---|
V2.6 HW Upgrade (X67DO9332.L12) | EXE / 413 кБ | |
V3.0 HW Upgrade (X67DO9332.L12) | EXE / 412 кБ | |
V4.0 HW Upgrade (X67DO9332.L12) | EXE / 284 кБ |