X20BC008T

Short description
Bus controller OPC UA FX
General information
B&R ID code 0xF629
Status indicators Module status, bus function
Diagnostics
Module status Yes, using LED status indicator and software
Bus function Yes, using LED status indicator and software
Power consumption
Bus 3.5 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
Interfaces
Fieldbus OPC UA Field eXchange (FX)
Variant 2x shielded RJ45 (switch)
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 1 Gbit/s
Transfer
Physical layer 100BASE-TX/1000BASE-T
Half-duplex No
Full-duplex Yes
Autonegotiation Yes
Auto-MDI/MDIX Yes
Min. cycle time
Fieldbus 400 µs
X2X Link 400 µs
Synchronization between bus systems possible Yes
Electrical properties
Electrical isolation OPC UA FX isolated from bus and I/O
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 50°C
Vertical mounting orientation -25 to 45°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x power supply module X20PS9400 or X20PS9402 separately.
Order 1x bus base X20BB80X separately.
Pitch 37.5+0.2 mm
Номер модель:
X20BC008T
Описание:
  • Communication technology: OPC UA Field eXchange (FX)
  • I/O configuration via OPC UA FX
  • 400 µs minimum cycle time
  • Integrated switch for daisy-chaining
  • 2x 1 Gbit/s full-duplex mode
  • OPC UA diagnostics and module diagnostics at runtime via OPC UA clients

This bus controller provides OPC UA FX functions. This allows any OPC UA clients access to read or write data from I/O modules connected to the bus controller.

Обязательные аксессуары
System modules for bus controllers
X20BB80X X20 bus controller base for X20BC008T and X20 power supply module, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9400 Модуль питания X20, для контроллера шины и внутренней шины ввода/вывода, питание шины X2X
X20PS9402 Модуль питания X20, для контроллера шины и внутренней шины ввода/вывода, питание шины X2X, без гальванической развязки
Terminal blocks
X20TB12 Клеммная колодка X20, 12 контактов, кодировка 24 В постоянного тока
E-CAD (Electro или EPLAN шаблоны) Версия (Дата) Загрузка
X20 EPLAN P8 from V2.4 EXE / 160 MB
M-CAD (Механические Шаблоны Версия (Дата) Загрузка
3D File STEP/DXF X20BC and X20IF Module ZIP / 1 MB
Документация Версия (Дата) Загрузка
Data sheet X20BC008T PDF / 7 MB
X20 System User´s Manual PDF / 45 MB
Обновление прошивки Версия (Дата) Загрузка
Firmwareupgrade X20BC008T ZIP / 69 MB
Сертификаты Версия (Дата) Загрузка
EU Declaration ATEX X20 PDF / 218 KB
EU Declaration of conformity PLC X20 PDF / 169 KB
UK Declaration PLC X20 PDF / 151 KB

Укажите страну и язык

B&R Logo