0PS3100.3

Status display	Green LED (DC OK), threshold value U_out > 21 V
Insulation voltages
Input - Output	6 kV DC (type test) 3.1 kV DC (routine test)
Input - Ground	4 kV DC (type test) 3.1 kV DC (routine test)
Input - Signal	6 kV DC (type test) 3.1 kV DC (routine test)
Active DC OK switch output	See section "Dry switching contact".
Connection type	Push-in connection
Certifications
CE	Yes
UKCA	Yes
UL	cULus E534663 Industrial control equipment

Nominal input voltage	400 to 500 VAC
Input voltage	3x 400 to 500 VAC -20% to +10% 2x 400 to 500 VAC ±10%
Network type	Star network (TN, TT, IT(PE))
Frequency	50 to 60 Hz ±10%
Inrush current	<13 A
Current consumption	3x 0.68 A / 3x 0.57 A (3x 400/500 VAC) 2x 1.3 A / 2x 1.1 A (2x 400/500 VAC)
I²t	<0.25 A²s
Power failure bypass	Typ. 35 ms (3x 400 VAC) Typ. 58 ms (3x 480 VAC)
Leakage current to PE	<3.5 mA
Protective circuit	Varistor transient protection
Internal fuse	3.15 A
Required line fuse for device and line protection	See section "Input protection".

Nominal voltage	24 VDC
Output power	240 W / Max. 360 W (5 s)
Output voltage	24 to 28 VDC
Output current	10 A / Max. 15 A (5 s)
Setting range for output voltage	24 to 28 VDC
Control deviation	<0.1% (input voltage change ±10%) <3% (load change, dynamic) <1% (load change, static)
Rise time	≤1 s (U_OUT (10 to 90%))
Residual ripple	Typ. 10 mV_SS
Can be connected in parallel	Yes, for increased efficiency and redundancy with diode
Can be connected in series	Yes, for increased output voltage (observe SELV limit)
Overvoltage protection	≤35 VDC (on the output (OVP))
Protection functions	Short-circuit protection
Feedback voltage resistance	≤35 VDC

Mounting orientation
Horizontal	Yes
Vertical	No
Installation elevation above sea level
Maximum	5000 m
Flammability class	V0
Ventilation/Cooling	Normal convection, no fan required
Degree of protection per EN 60529	IP20
Protection class	I

Temperature
Operation	-25 to 70°C
Derating	See section "Derating".
Starting temperature	-40°C
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	Max. 95%, non-condensing
Vibration
Operation	10 to 50 Hz, amplitude ±0.2 mm 50 to 150 Hz, 2.3 g, 90 min, per IEC 60068-2-6
Shock
Operation	18 ms, 30 g, in each direction, per IEC 60068-2-27
Pollution degree	2
Climate category	3K3, per EN 60721
Overvoltage category	III (≤2000 m) / II (≤5000 m), per EN 61010-1 III (≤2000 m) / II (≤5000 m), per EN 61010-2-201

Housing
Material	Aluminum sheet, plastic cover PA
Coating	No protective coating
Installation	Easy top-hat rail installation (NS 35 rails, EN 60715)
Dimensions
Width	40 mm
Height	135 mm
Depth	132 mm
Weight	700 g

0PS3100.3

Minimum space requirement in the control cabinet due to a thin design
Robust and reliable thanks to dynamic boost with a strong output characteristic curve for starting heavy loads
Optical and preventive function monitoring with three-color LED and dry switching contact
Easy handling due to push-in connections, label fields, wire stripping mark and tamper-resistant setup
Can be connected in parallel for increased power and redundancy
Temperature range: -25°C to +70°C
Worldwide use thanks to AC and DC wide-range input
International certification package

24 VDC power supply unit, 3-phase, 10 A, input 400 to 500 VAC, wide range, thin design, top-hat rail installation

E-CAD (Electro или EPLAN шаблоны)	Версия (Дата)	Загрузка
PowerSupply EPLAN P8 from V2.4		EXE / 13 МБ Авторизироваться для загрузки

M-CAD (Механические Шаблоны	Версия (Дата)	Загрузка
3D file DXF/STEP 0PS3100.3		ZIP / 1 МБ Авторизироваться для загрузки

Документация	Версия (Дата)	Загрузка
Data sheet 0PS3100.3		PDF / 2 МБ Авторизироваться для загрузки

Сертификаты	Версия (Дата)	Загрузка
EU Declaration Power supplies		PDF / 128 кБ Авторизироваться для загрузки