General information
Certifications | |
CE | Yes |
UL |
cULus E225616 Power conversion equipment |
KC | Yes |
Motor power
Specified on nameplate |
22 kW 30 PS |
Mains connection
Line-conducted and radiated emissions
Motor connection
Brake chopper
24 VDC power supply
Input voltage | 24 VDC (min. 19 V, max. 30 V) |
Power consumption | 30 W |
Available internal power supplies
Output voltage 24 VDC | 24 VDC (min. 21 V, max. 27 V) |
Output voltage 24 VDC | |
Max. output current at 24 VDC | 200 mA |
Output voltage 10.5 VDC | 10.5 VDC ±5% |
Output voltage 10.5 VDC | |
Max. output current 10.5 VDC | 10 mA |
Safe input - Power removal
Switching threshold | |
Low | <5 V |
High | >15 V |
Electrical isolation | |
Input - ACOPOSinverter | Yes |
Input - Input | No |
Quantity | 1 |
Nominal voltage | 24 VDC |
Response time | ≤100 ms |
Input impedance | 1.5 kΩ |
Input circuit | Sink |
Digital inputs
Analog inputs
Quantity | 2 |
Electrical isolation | |
Input - Input | No |
Input - ACOPOSinverter | Yes |
Input | |
Voltage | ±10 V |
Voltage/Current | 0 to 10 V or 0 to 20 mA |
Resolution | ±11 bits |
Sampling time | <2 ms ±0.5 ms |
Input impedance | |
Voltage | 30 kΩ |
Current | 242 Ω |
Relay outputs
Quantity | 2 |
Nominal voltage | 30 VDC / 250 VAC |
Switching capacity | Max. 2 A at 250 VAC or 30 VDC with resistive load |
Switching capacity | |
Min. | 3 mA for 24 VDC |
Max. | |
With resistive load (cos φ = 1 and L/R = 0 ms) | 2 A for 250 VAC or 30 VDC |
With inductive load (cos φ = 0.4 and L/R = 7 ms) | 1.5 A for 250 VAC or 30 VDC |
Variant | |
Relay 1 | 1 NO contact and 1 NC contact with a common point |
Relay 2 | 1 NO contact |
Response time (max.) | <7 ms ±0.5 ms |
Electrical isolation | |
Output - ACOPOSinverter | Yes |
Output - Output | No |
Analog outputs
Operating conditions
Ambient conditions
Temperature | |
Storage | -25 to 70°C |
Vibration | |
Operation | 3 to 13 Hz: 1.5 mm amplitude / 13 to 200 Hz: 1 g |
Shock | |
Operation | 15 g, 11 ms |
Mechanical properties
Dimensions | |
Width | 240 mm |
Height | 420 mm |
Depth | 236 mm |
Weight | 30 kg |
Номер модель:
8I84T202200.01P-1Описание:
ACOPOSinverter P84, 3x 200 to 240 V, 22 kW, integrated brake chopper, shield plate included in delivery, POWERLINK interface.
Дополнительные аксессуары
Cable and adapters
8I0XD304.301-1 | Кабель RJ45, 1 м, для графического дисплея преобразователя ACOPOSinverter. |
8I0XD304.303-1 | Кабель RJ45, 3 м, для графического дисплея преобразователя ACOPOSinverter. |
8I0XD304.305-1 | Кабель RJ45, 5 м, для графического дисплея преобразователя ACOPOSinverter. |
8I0XD304.310-1 | Кабель RJ45, 10 м, для графического дисплея преобразователя ACOPOSinverter. |
Control card fan kits
8I0XF004.300-1 | Control card fan kit, for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW and 3x 380 to 480 V, 22 kW, for operation at an ambient temperature of 50 to 60°C. |
DC bus choke
8I0DC171.300-1 | DC bus choke 171 A, for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW and 3x 380 to 480 V, 45 to 75 kW. |
Fans (spare part)
8I0XF084.060-1 | Fan for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW and 3x 380 to 480 V, 22 kW. |
Feed-through mounting kits
8I0MF006.300-1 | Feed-through mounting kit, for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW and 3x 380 to 480 V, 22 kW. |
Graphic display terminal
8I0XD301.300-1 | ACOPOSinverter P74/P84 графический дисплей, 8 строк, 240 x 160 пикселей, подсветка, функциональные клавиши, клавиши навигации, защита IP54 |
8I0XD302.300-1 | Комплект для отдельной установки графического дисплея, защита IP54 |
8I0XD303.300-1 | Передняя крышка для комплекта для отдельной установки графического дисплея, защита IP65 |
8I0XD305.300-1 | Адаптер RJ45 для графического дисплея |
Incremental encoder interfaces
8I0AC123.300-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for RS422 signals (TTL), 5 V supply voltage. |
8I0AC123.301-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for RS422 signals (TTL), 15 V supply voltage. |
8I0AC123.302-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for open collector, 12 V supply voltage. |
8I0AC123.303-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for open collector, 15 V supply voltage. |
8I0AC123.304-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 12 V supply voltage. |
8I0AC123.305-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 15 V supply voltage. |
8I0AC123.306-1 | ACOPOSinverter P84 plug-in module, incremental encoder interface for push-pull HTL, 24 V supply voltage. |
Optional EMC filters
8I0FT090.300-1 | 90 A EMC filter for ACOPOSinverter P84 (3-phase 200-240 V, 18.5-22 kW and 3x 380-480 V, 22 kW). |
Optional braking resistors
8I0BR005.000-1 | Braking resistor 5 Ω, continuous braking power 1.3 kW, for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW and 3x 380 to 480 V, 45 to 75 kW. |
M-CAD (Механические Шаблоны | Версия (Дата) | Загрузка |
---|---|---|
3D file DXF/ STEP 8I84_Size6 | ZIP / 5 MB |
Документация | Версия (Дата) | Загрузка |
---|---|---|
ACOPOSinverter P84 User´s Manual | PDF / 26 MB |
Обновление Automation Studio HW | Версия (Дата) | Загрузка |
---|---|---|
V3.0 HW Upgrade (8I84xxxxxxx.01P-1) | EXE / 13 MB | |
V4.0 HW Upgrade (8I84xxxxxxx.01P-1) | EXE / 13 MB |
Общие сведения | Версия (Дата) | Загрузка |
---|---|---|
ACPi ParameterTool | Авторизироваться для загрузки |
Сертификаты | Версия (Дата) | Загрузка |
---|---|---|
E225616 UL Certificate of Compliance ACOPOSinverter | PDF / 83 KB |