Short description
I/O module | 8 digital outputs for switching electromechanical loads, current monitoring, switching instant detection, pulse width modulation |
General information
B&R ID code | 0x1D43 |
Status indicators | I/O function per channel, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Outputs | Yes, using LED status indicator and software (output error status) |
Power consumption | |
Bus | 0.01 W |
Internal I/O | 1 W (Rev. ≥G0), 1.5 W (Rev. <G0) |
External I/O | Corresponding to external load |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
Digital outputs
Nominal voltage | 24 VDC |
Nominal output current | 0.6 A |
Total nominal current | 4.8 A |
Connection type | 1-wire connections |
Output circuit | Sink |
Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
Pulse width modulation | |
Period duration | 1 ms (1 kHz) or 20 µs (50 kHz) |
Pulse duration | 0 to 100% |
Resolution for pulse duration | 1% |
Inrush current | Max. 2 A for max. 25.5 ms |
Braking voltage when switching off inductive loads | 39 VDC |
Reverse polarity protection | No (must be protected externally) |
Output voltage | |
Minimum | 18 VDC |
Nominal | 24 VDC |
Maximum | 42 VDC |
Protective circuit | |
External | 24 VDC power supply - maximum current 10 A (melting fuse) |
Electrical properties
Electrical isolation |
Bus isolated from channel and internal I/O power supply Channel not isolated from channel and internal I/O power supply |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
![](/fileadmin/X20CM8323.right-04009585.jpg)
Número do material:
X20CM8323Descrição:
- 8 digital outputs
- Current trace
- Switching time detection
- Pulse width modulation
The module has digital outputs for switching electromechanical loads (e.g. valves, relays) and additional functions.
Acessórios obrigatórios
Atualizações de HW Automation Studio | Version (Data) | Download |
---|---|---|
V2.6 HW Upgrade (X20CM8323) | EXE / 606 KB | |
V2.6 HW Upgrade (X20CM8323) | EXE / 2 MB | |
V3.0 HW Upgrade (X20CM8323) | EXE / 605 KB | |
V3.0 HW Upgrade (X20CM8323) | EXE / 3 MB | |
V4.0 HW Upgrade (X20CM8323) | EXE / 2 MB |
Documentação | Version (Data) | Download |
---|---|---|
Data sheet X20CM8323 | PDF / 1 MB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |
E-CAD (Modelos Electro ou EPLAN) | Version (Data) | Download |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD (Mechan. Modelos) | Version (Data) | Download |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |