General information
Cable construction
Connector
Type | 13-pin female speedtec circular connector |
Mating cycles | <500 |
Contacts | 13 |
Additional connectors |
13-pin male coupling Mating cycles: <500 Contacts: 13 Degree of protection per EN 60529: IP66/67 when connected |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤13.3 Ω/km |
Supply lines | ≤26 Ω/km |
Signal line | 0.30 mm²: ≤68 Ω/km, 0.15 mm²: ≤140 Ω/km |
Insulation resistance | ≥200 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 20.2 A |
Installed in conduit or cable duct | 17.8 A |
Installed in cable tray | 20.9 A |
Número do material:
8ECH0030.11140-0Descrição:
- Can be used in cable drag chains
- Extension cable for hybrid motor cable 8CHxxx.12-1 / 8BCHxxxx.1111A-0 / 8ECHxxxx.1111A-0
- speedtec - Innovative connector system for secure connections
Cable connections with more than five extensions plugged in one after the other are not permitted!
Observe the maximum permissible cable lengths of the respective servo drives!
Certificados | Version (Data) | Download |
---|---|---|
EU Declaration Servos ACOPOS P3 | PDF / 205 KB | |
UK Declaration ACOPOSmicro | PDF / 109 KB | |
UK Declaration Servos ACOPOS P3 | PDF / 126 KB |
Documentação | Version (Data) | Download |
---|---|---|
Datasheet 8ECH0030.11140-0 | PDF / 301 KB |