General information
Cable construction
Connector
Type | 13-pin female speedtec hybrid motor connector |
Mating cycles | <500 |
Contacts | 13 |
Additional connectors |
9-pin male DSUB connector Mating cycles: <200 Contacts: 9 Degree of protection per EN 60529: IP20 when connected |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤13.3 Ω/km |
Supply lines | ≤26 Ω/km |
Signal line | 0.30 mm²: ≤68 Ω/km, 0.15 mm²: ≤140 Ω/km |
Insulation resistance | ≥200 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 20.2 A |
Installed in conduit or cable duct | 17.8 A |
Installed in cable tray | 20.9 A |
Material number:
8CH007.12-1Description:
- Can be used in cable drag chains
- Motor and encoder lines in one cable
- Assembled specifically for use with ACOPOS servo drives 8V1010/1016/1022/1045/1090 and B&R servo motors with option "Single-cable solution (hybrid)"
- speedtec - Innovative connector system for secure connections
Dokumentacja | Version (Date) | Download |
---|---|---|
Datasheet 8CH007.12-1 | PDF / 279 KB |