General information
| B&R ID code | 0xF9B9 |
| Status LED |
1x red/green; configurable 2x red/green/blue; configurable, dimmable |
| Buzzer | Yes |
| Brightness sensor | Yes |
| Certifications | |
| UN ECE-R10 | Yes |
| CE | Yes |
| UKCA | Yes |
| DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
Controller
| Operating system | PPT50 system |
| Processor | |
| Type | ARM Cortex-A9, dual core |
| Clock frequency | 800 MHz |
| Flash | 512 MB |
| DRAM | 1 GB |
Display
| Type | TFT color |
| Diagonal | 10.1" |
| Colors | 16.7 million (RGB, 8 bits per channel) |
| Resolution | WXGA, 1280 x 800 pixels |
| Contrast | Typ. 800:1 |
| Viewing angles | |
| Horizontal | Direction L / Direction R = Typ. 85° |
| Vertical | Direction U / Direction D = Typ. 85° |
| Backlight | |
| Type | LED |
| Brightness | Typ. 500 cd/m² |
| Brightness (dimmable) | Yes |
| Half-brightness time | 50,000 h |
| Touch screen | |
| Type | Multi-touch |
| Technology | PCT (projected capacitive touch) |
| Surface | Glass, chemically hardened (6H) |
| Screen rotation | Yes |
Interfaces
| Interface IF1 | |
| Type | Ethernet |
| Variant | M12, D-coded |
| Transfer rate | 10/100 Mbit |
| Interface IF3 | |
| Type | USB 2.0 |
| Variant | On multi-header |
| Current-carrying capacity | Max. 0.5 A |
Digital inputs
| Quantity | 8 |
| Nominal voltage | 12 / 24 VDC |
| Input voltage | 9 to 32 VDC |
| Input circuit | Sink |
| Input filter | |
| Hardware | Approx. 20 ms |
| Software | No |
| Input current |
Typ. 1.3 mA (at 12 VDC)
Typ. 2.5 mA (at 24 VDC) |
| Input resistance | Typ. 9 kΩ |
| Switching threshold | Typ. 50% of the supply voltage |
Digital outputs
| Quantity | 4 |
| Variant | Source (current-sourcing FET) |
| Nominal voltage | 12 / 24 VDC |
| Nominal output current | Max. 0.5 A permissible continuous current |
| Output protection |
Shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
|
| Diagnostic status | Status display via read-back measurement |
| RDS(on) | Max. 100 mΩ |
| Residual voltage | <0.1 V at 0.5 A nominal current |
| Additional functions |
Overload shutdown / short-circuit shutdown: Yes (for each channel); must be acknowledged by user
Hardware filter read-back measurement: Approx. 20 ms Software filter read-back measurement: No Short-term overcurrents during the switch-on procedure are tolerated. |
Electrical properties
Operating conditions
| Mounting orientation | |
| Any | Yes |
| Degree of protection per EN 60529 | IP66 |
Ambient conditions
Mechanical properties
| Front | |
| Design | Black |
| Dimensions | |
| Width | 271.5 mm |
| Height | 190 mm |
| Depth | 53 mm |
| Weight | 1260 g |
Material number:
6PMT50.101E-19BDescription:
Power Panel T50 mobile, 10.1", glass front, 1x Ethernet. CPU and memory: 800 MHz dual core (ARM Cortex-A9), 1 GB RAM, 512 MB onboard flash drive. Display and touch screen: 10.1", 1280 x 800 (WXGA) resolution, projected capacitive touch screen, multi-touch support, glass front with black frame, landscape and portrait format configurable with software. Interfaces: 1x Ethernet 10/100 Mbit/s, 1x USB 2.0 on multi-header. Client software: Integrated service page, VNC client, embedded web browser.
Optional Accessories
Brackets
| 6PM.AC.PAN-101 | T50 mobile 10.1 inch, panel installation set |
| 6PM.AC.RAM-002 | RAM installation set 1.5 inch, C-ball, diamond plate for panel, including screws, medium connecting arm, round base plate, suitable for T50 mobile 5", 7", 10.1" |
Mounting tools
| X67ACTQMX | X67 torque wrench set, for X67 M8 and M12 connectors, for hex-head connectors |
Other
| 6PMTBT50.01-00 | T50 mobile, connector for Superseal header, with connector contacts and dummy plugs |
POWERLINK/Ethernet
| X67AC2E01 | X67 M12 connector, 4-pin, D-coded, shielded, insulation piercing connection |
POWERLINK/Ethernet-Cable
| X67CA0E41.0010 | POWERLINK/Ethernet connection cable, RJ45 to M12, 1 m |
| X67CA0E41.0020 | POWERLINK/Ethernet connection cable, RJ45 to M12, 2 m |
| X67CA0E41.0030 | POWERLINK/Ethernet connection cable, RJ45 to M12, 3 m |
| X67CA0E41.0050 | POWERLINK/Ethernet connection cable, RJ45 to M12, 5 m |
| X67CA0E41.0150 | POWERLINK/Ethernet connection cable, RJ45 to M12, 15 m |
| X67CA0E41.0500 | POWERLINK/Ethernet connection cable, RJ45 to M12, 50 m |
| X67CA0E61.0010 | POWERLINK/Ethernet connection cable, M12 to M12, 1 m |
| X67CA0E61.0020 | POWERLINK/Ethernet connection cable, M12 to M12, 2 m |
| X67CA0E61.0050 | POWERLINK/Ethernet connection cable, M12 to M12, 5 m |
| X67CA0E61.0100 | POWERLINK/Ethernet connection cable, M12 to M12, 10 m |
| X67CA0E61.0150 | POWERLINK/Ethernet connection cable, M12 to M12, 15 m |
| X67CA0E61.0200 | POWERLINK/Ethernet connection cable, M12 to M12, 20 m |
| X67CA3E41.0150 | POWERLINK/Ethernet connection cable, RJ45 to M12, can be used in cable drag chains, 15 m |
Wiring harness
| 6PMCAT50.02-00 | T50 mobile, wiring harness starter set for T50 mobile, 2 m length, for Superseal connection |
| Aktualizacja Automation Studio HW | Version (Date) | Download |
|---|---|---|
| V4.7 HW Upgrade (6PMT50.101E-19B) | EXE / 5 MB | |
| V6.0 HW Upgrade (6PMT50.101E-19B) | EXE / 5 MB |
| Certyfikaty | Version (Date) | Download |
|---|---|---|
| UN ECE-R10 | PDF / 378 KB |
| Dokumentacja | Version (Date) | Download |
|---|---|---|
| Power Panel T50 mobile user's manual | PDF / 7 MB |
| E-CAD (szablony Electro lub EPLAN) | Version (Date) | Download |
|---|---|---|
| Makro-/Artikeldaten 4.0.2 (6PMT50.101E-19B) | EXE / 610 KB | |
| Makro-/Artikeldaten 4.0.2 (6PMT50.101E-19B) | EXE / 613 KB |
| M-CAD (Mechan. szablony) | Version (Date) | Download |
|---|---|---|
| 3D files STP 6PMT50.101E-19B | ZIP / 7 MB |
| Obrazy Linux | Version (Date) | Download |
|---|---|---|
| V4.7 LX Upgrade PMT50 | EXE / 223 MB | |
| V4.7 LX Upgrade PMT50 ZIP | ZIP / 223 MB | |
| V6.0 LX Upgrade PMT50 | EXE / 223 MB | |
| V6.0 LX Upgrade PMT50 ZIP | ZIP / 223 MB |
| Ogólne | Version (Date) | Download |
|---|---|---|
| DNV Type Approval Certificate - Power Panel T50 mobile | PDF / 179 KB |