Zaloguj

X20PD0053

Short description

Potential distributor module	6x GND, 6x 5 VDC on the terminals

General information

B&R ID code	0x04AF
Status indicators	Module status, channel status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Power consumption
Bus	0.1 W
Internal I/O	0.5 W
Additional power dissipation caused by actuators (resistive) [W]	Per output 180 mΩ * Output current²
Certifications
CE	Yes
UKCA	Yes

Encoder power supply

Quantity	6
Nominal voltage	5 VDC ±5%
Connection type	2-wire connections
Additional functions	Short-circuit monitoring Overload error starting at 200 mA
Insulation voltage between channel and bus	500 V_eff

Electrical properties

Electrical isolation	I/O power supply isolated from output

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 50°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5^+0.2 mm

Material number:

X20PD0053

Description:

Free shunting potentials
Monitoring the outputs

The potential distribution module provides 6x 5 VDC and 6x ground on the terminal connections. It thus offers additional wiring options for actuators or sensors. The supplied 24 VDC and status of the outputs are monitored.

Mandatory Accessories

Bus modules

X20BM11	X20 bus module, 24 VDC keyed, internal I/O power supply connected through
X20BM15	X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through

Terminal blocks

X20TB12	X20 terminal block, 12-pin, 24 VDC keyed

Aktualizacja Automation Studio HW	Version (Date)	Download
V4.0 HW Upgrade (X20PD0053)		EXE / 599 KB Zaloguj się aby pobrać

Certyfikaty	Version (Date)	Download
EU Declaration ATEX X20		PDF / 218 KB Zaloguj się aby pobrać
EU Declaration of conformity PLC X20		PDF / 169 KB Zaloguj się aby pobrać
UK Declaration PLC X20		PDF / 151 KB Zaloguj się aby pobrać

Dokumentacja	Version (Date)	Download
Data sheet X20PD0053		PDF / 174 KB Zaloguj się aby pobrać
X20 System User´s Manual		PDF / 7 MB Zaloguj się aby pobrać

E-CAD (szablony Electro lub EPLAN)	Version (Date)	Download
Makro-/Artikeldaten 4.0.2 (X20PD0053)		EXE / 763 KB Zaloguj się aby pobrać
X20 EPLAN P8 from V2.4		EXE / 160 MB Zaloguj się aby pobrać