Short description
Bus controller | CANopen |
General information
Input power supply
Input voltage | 9 to 32 VDC |
Input current | |
V_CPU | Max. 3 A |
V_I/O | Max. 10 A per pin |
Integrated protection | |
V_CPU | No, required fuse max. 3 A slow-blow |
V_I/O | No, required fuse max. 10 A slow-blow |
Controller
Real-time clock | No |
FPU | Yes |
Processor | |
Type | ARM Cortex-M4 |
Integrated I/O processor | Processes I/O data points in the background |
Option boards | 0 |
Interfaces
Multi-function inputs
Multi-function outputs
Digital inputs
Quantity | 0 to 32, depends on the use of multifunction inputs/outputs |
Nominal voltage | 12 / 24 VDC |
Input voltage | 9 to 32 VDC |
Input current at 24 VDC |
MF-DI: 1.2 mA MF-AI: 1.2 mA MF-DO_plus: <1 mA MF-PWM: <1 mA MF-PVG: Typ. 10 mA |
Input circuit | Sink/Source, configurable |
Input filter | |
Hardware |
MF-DI: 3 μs if switching threshold = 50% supply voltage MF-AI: 600 μs if switching threshold = 50% supply voltage MF-DO: 300 μs MF-PWM: 150 μs |
Software | Default 1 ms, configurable between 0 and 25 ms in 0.1 ms increments |
Input resistance | MF-AI and MF-DI: Typ. 22 kΩ |
Additional functions |
Counter functions (inputs 13 to 16) Edge detection: Max. 50 kHz Period duration / Gate measurement: Max. 3.5 kHz ABR, AB and DF counters |
Input frequency | MF-DI: Max. 50 kHz |
Switching threshold |
MF-DI: 50% of supply voltage MF-AI: Switching threshold and hysteresis configurable with software MF-DO: 50% supply voltage MF-PWM: 50% supply voltage |
Analog inputs
Digital outputs
PWM output
Operating conditions
Mounting orientation | |
Any | Yes |
Degree of protection | IP69K |
Ambient conditions
Temperature | |
Operation | -40 to 85°C housing surface |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 100%, condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Dimensions | |
Width | 153 mm |
Length | 140 mm |
Height | 44 mm |
Weight | 700 g |
![](/fileadmin/X90BC124.32-00.right-f0a23869.jpg)
Materiaalnummer:
X90BC124.32-00Omschrijving:
- Agricultural and forestry machines
- Construction machinery
- Municipal utility vehicles
- Stationary outdoor applications
- 32 multifunction inputs or outputs
- Sensor power supply
- CANopen connection (daisy chain)
Bus controller module X90BC124.32-00 is a configurable CANopen slave module for sensor and actuator management. 32 multifunction inputs and outputs are available for a wide range of tasks.
The robust die-cast aluminum housing enables use in harsh ambient conditions.
Optionele toebehoren
BreakOut Box
X90AC-BB.12-00 | X90 mobile 120, breakout box template and cable adapter for X90AC-BB.17-00 breakout box, for development and tests |
CMC connector
X90TB120.01-00 | X90 mobile 120, connector set for CMC header, with connector contacts and dummy plugs |
Wire harness
X90CA124.02-00 | X90 mobile 120, wiring harness starter set for X90BC124, 2 m, for CMC header |
Automation Studio HW Upgrades | Versie (Datum) | Download |
---|---|---|
V4.7 HW Upgrade (X90BC124.32-00) | EXE / 4 MB | |
V6.0 HW Upgrade (X90BC124.32-00) | EXE / 4 MB |
Documentatie | Versie (Datum) | Download |
---|---|---|
Data sheet X90BC124.32-00 | PDF / 3 MB | |
X90 BC pin allocation CMC connector | ZIP / 1 MB | |
X90 mobile System User´s Manual | PDF / 49 MB |
E-CAD (Electro of EPLAN Templates) | Versie (Datum) | Download |
---|---|---|
Makro-/Artikeldaten 4.0.2 (X90BC124.32-00) | EXE / 3 MB | |
X90 EPLAN P8 from V2.4 | EXE / 69 MB |
M-CAD (Mechan. Templates) | Versie (Datum) | Download |
---|---|---|
3D files DXF/STEP X90BC124.32-00 | ZIP / 4 MB |