General information
Cable construction
Connector
Type | 8-pin female speedtec motor connector, size 1.0 |
Mating cycles | <500 |
Contacts | 8 (4 power and 4 signal contacts) |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Operating voltage | Max. 1000 VAC (UL) |
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤13.7 Ω/km |
Signal line | ≤26.7 Ω/km |
Insulation resistance | ≥500 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 20 A |
Installed in conduit or cable duct | 17.8 A |
Installed in cable tray | 20.9 A |
Materiaalnummer:
8CM025.12-1Omschrijving:
- Can be used in cable drag chains
- Assembled specifically for use with ACOPOS 1010/1016/1022/1045/1090 servo drives and B&R servo motor with motor connector size 1
Certificaten | Versie (Datum) | Download |
---|---|---|
E225616 UL Certificate of Compliance ACOPOS | PDF / 242 KB | |
EU Declaration Servos ACOPOS | PDF / 609 KB | |
UK Declaration Servos ACOPOS | PDF / 109 KB |
Documentatie | Versie (Datum) | Download |
---|---|---|
ACOPOS User´s Manual | PDF / 49 MB | |
Datasheet 8CM025.12-1 | PDF / 169 KB |