Short description
I/O module | 2 analog inputs ±10 V |
General information
Analog inputs
Sensor power supply
Power consumption | 0.75 W per channel |
Nominal voltage | 25 V ±2% |
Nominal output current | Max. 30 mA |
Short-circuit proof | Yes, continuous |
Max. voltage ripple | |
Up to 100 kHz | ≤2.2 mV |
Up to 1 MHz | ≤22 mV |
Higher | ≤100 mV |
Short-circuit current | |
Typical | <50 mA |
Maximum | 60 mA |
Behavior on short circuit | Current limiting |
Electrical properties
Electrical isolation |
Channel isolated from channel and bus Sensor power supply isolated from sensor power supply Sensor power supply not isolated from channel |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
型番:
X20AI2237説明:
- 2 analog voltage inputs
- Electrically isolated analog channels
- Electrically isolated sensor supplies
- 16-bit digital converter resolution
- Very high sampling rate
- NetTime timestamp: Moment of measurement
The module is equipped with 2 voltage measurement inputs with 16-bit digital converter resolution.
Each voltage input has its own sensor supply. The two channels with their respective sensor supplies are electrically isolated from each other.
必須アクセサリ
Automation Studio HW アップグレード | バージョン (日付) | ダウンロード |
---|---|---|
V2.7 HW Upgrade (X20AI2237) | EXE / 1 MB | |
V3.0 HW Upgrade (X20AI2237) | EXE / 2 MB | |
V4.0 HW Upgrade (X20AI2237) | EXE / 842 KB |
E-CAD(ElectroまたはEPLANテンプレート) | バージョン (日付) | ダウンロード |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD (Mechan.Templates) | バージョン (日付) | ダウンロード |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |
ドキュメンテーション | バージョン (日付) | ダウンロード |
---|---|---|
Datasheet X20AI2237 | PDF / 417 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 Package leaflet ATEX/CSA | PDF / 2 MB | |
X20 System User´s Manual | PDF / 7 MB |