General information
Certifications
CE Yes
UKCA Yes
Terminal block
Number of pins 16
Type of terminal block Design as push-in terminal block with actuating element
Push-in force per contact Max. 3.5 N
Cable type Only copper wires (no aluminum wires!)
Pitch 3.5 mm
Wire stripping length 10 mm
Connection cross section
AWG wire 30 to 16 AWG
Wire end sleeves with plastic covering 0.14 to 1.00 mm²
Single-wire 0.14 to 1.50 mm²
Fine-stranded wires 0.14 to 1.50 mm²
With wire end sleeve 0.14 to 1.50 mm²
Electrical properties
Nominal voltage IEC: 320 V
UL: 300 V
Nominal current IEC: 10 A / contact
UL: 9.5 A / contact
Contact resistance ≤5 mΩ
Ambient conditions
Temperature
Operation Corresponds to the module used
Relative humidity
Operation Corresponds to the module used
Numero materiale:
X20TBS1
Descrizione:
Terminal block set for X20 I/O module: 2x 16-pin terminal block
Certificati Versione (data) Download
EU Declaration of conformity PLC X20 PDF / 169 KB
Documentazione Versione (data) Download
Data sheet X20TBS1 PDF / 282 KB

Si prega di scegliere il Paese e la lingua

B&R Logo