Short description
| Communication module | 3x CAN bus, 2x LIN |
General information
| B&R ID code | 0x2A7E |
| Status indicators | - |
| Power consumption | 1 W |
| Certifications | |
| UN ECE-R10 | Yes |
| CE | Yes |
| UKCA | Yes |
Interfaces
| Interface IF1 | |
| Connection designation | CAN1 |
| Signal | CAN bus |
| Max. distance | 1000 m |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | External 120 Ω must be provided. |
| Interface IF2 | |
| Connection designation | CAN2 |
| Signal | CAN bus |
| Max. distance | 1000 m |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | External 120 Ω must be provided. |
| Interface IF3 | |
| Connection designation | CAN3 |
| Signal | CAN bus |
| Max. distance | 1000 m |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | External 120 Ω must be provided. |
| Interface IF4 | |
| Connection designation | LIN1 |
| Signal | LIN |
| Max. distance | 40 m |
| Transfer rate | Max. 20 kbit/s |
| Interface IF5 | |
| Connection designation | LIN2 |
| Signal | LIN |
| Max. distance | 40 m |
| Transfer rate | Max. 20 kbit/s |
Electrical properties
| Electrical isolation | No |
Ambient conditions
Mechanical properties
| Dimensions | |
| Width | 47 mm |
| Length | 95 mm |
Numero materiale:
X90IF7L0.05-00Descrizione:
X90 mobile IF option board, 3x CAN, 2x LIN (master), configuration using software
| Aggiornamenti HW di Automation Studio | Versione (data) | Download |
|---|---|---|
| V4.9 HW Upgrade (X90IF7L0.05-00) | EXE / 3 MB | |
| V6.0 HW Upgrade (X90IF7L0.05-00) | EXE / 3 MB |
| Certificati | Versione (data) | Download |
|---|---|---|
| UN ECE-R10 | PDF / 382 KB |
| Librerie tecnologiche | Versione (data) | Download |
|---|---|---|
| V4.12 CP Upgrade (CpLin) | EXE / 5 MB | |
| V4.12 Library Upgrade (CpLin) | EXE / 3 MB | |
| V6.0 CP Upgrade (CpLin) | EXE / 5 MB | |
| V6.0 Library Upgrade (CpLin) | EXE / 3 MB |