General information
Cable construction
Connector
Type | 13-pin female stainless steel circular connector |
Mating cycles | <500 |
Contacts | 13 |
Additional connectors |
9-pin male DSUB connector Mating cycles: <200 Contacts: 9 Degree of protection per EN 60529: IP20 when connected |
Degree of protection per EN 60529 | IP69K when connected |
Electrical properties
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤8.2 Ω/km |
Supply lines | ≤84 Ω/km |
Signal line | 0.75 mm²: ≤26 Ω/km, 0.15 mm²: ≤140 Ω/km |
Insulation resistance | ≤500 Ω*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 27.3 A |
Installed in conduit or cable duct | 23.7 A |
Installed in cable tray | 29.1 A |
Numero materiale:
8BCH0020.5221A-0Descrizione:
- Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors
Documentazione | Versione (data) | Download |
---|---|---|
Datasheet 8BCH0020.5221A-0 | PDF / 195 KB |