General information
B&R ID code | 0x2F93 |
System requirements | |
Automation Studio | 4.6.1.x or later |
Cooling and mounting type | Wall mounting |
Slots for plug-in modules | 2 |
Certifications | |
CE | Yes |
UKCA | Yes |
Functional safety | Yes |
UL |
cULus E225616 Power conversion equipment |
KC | Yes |
DC bus connection
24 VDC power supply
24 VDC output
Quantity | 2 |
Output voltage | |
DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC/315) |
DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
Motor connection
Motor holding brake connection
Enable inputs
Trigger inputs
Quantity | 2 |
Circuit | Sink |
Electrical isolation | |
Input - Inverter module | Yes |
Input - Input | Yes |
Input voltage | |
Nominal | 24 VDC |
Maximum | 30 VDC |
Switching threshold | |
Low | <5 V |
High | >15 V |
Input current at nominal voltage | Approx. 10 mA |
Switching delay | |
Rising edge | 52 µs ±0.5 µs (digitally filtered) |
Falling edge | 53 µs ±0.5 µs (digitally filtered) |
Modulation compared to ground potential | Max. ±38 V |
Temperature sensor connection
Quantity | 1 |
Resistance range | 500 Ω to 5 kΩ |
Support
Motion system | |
mapp Motion | 5.24.1 and higher |
ACP10/ARNC0 | 5.24.1 and higher |
Electrical properties
Operating conditions
Ambient conditions
Temperature | |
Operation | |
Nominal | 5 to 40°C |
Maximum | 55°C |
Storage | -25 to 55°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 5 to 85% |
Storage | 5 to 95% |
Transport | Max. 95% at 40°C |
Référence produit:
8BVI0330HWS0.000-3Description:
ACOPOSmulti3 inverter module, 33 A, AS, wall mounting, optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
Accessoires obligatoires
Terminal block sets
8BZVI0440S0.000-1A | Jeu de borniers à vis pour modules ACOPOSmulti 8BVI0330HxS0 et 8BVI0440HxS0 : 1x 8TB2106.2010-00, 1x 8TB2108.2010-00, 1x 8TB2104.203L-00, 1x 8TB4104.204G-10 |
Accessoires optionnels
Accessory sets
8BXB000.0000-00 | Kit d'accessoires ACOPOSmulti pour la mise en mémoire tampon de l'encodeur, composé de : 1x pile AA 3,6 V, 1x couvercle de protection pour le support de pile |
Fan modules
8BXF001.0000-00 | Module de ventilation ACOPOSmulti, ventilateur de remplacement pour les modules ACOPOSmulti (8BxP/8B0C/8BVI/8BVE/8B0K) |
POWERLINK/Ethernet cables
X20CA0E61.00020 | Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 0,2 m |
X20CA0E61.00025 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.25 m |
X20CA0E61.00030 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.3 m |
X20CA0E61.00035 | POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.35 m |
X20CA0E61.00050 | Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 0,5 m |
X20CA0E61.00100 | Câble de connexion POWERLINK/Ethernet, RJ45 à RJ45, 1 m |
Plug-in modules
8BAC0120.000-1 | Module enfichable ACOPOSmulti, Interface EnDat 2.1 |
8BAC0120.001-2 | Module enfichable ACOPOSmulti, Interface EnDat 2.2 |
8BAC0121.000-1 | Module d'extension ACOPOSmulti, Interface HIPERFACE |
8BAC0122.000-1 | Module enfichable ACOPOSmulti, interface résolveur 10 kHz |
8BAC0123.000-1 | Module enfichable ACOPOSmulti, codeur incrémental et interface codeur absolu SSI pour signaux RS422 |
8BAC0123.001-1 | Module enfichable ACOPOSmulti, interface codeur incrémental pour 5 V asymétrique et 5 V différentiels |
8BAC0123.002-1 | Module enfichable ACOPOSmulti, interface codeur incrémental pour 24 V single-ended et 24 V différentiels |
8BAC0124.000-1 | Module d'extension ACOPOSmulti, Interface SinCos |
8BAC0125.000-1 | Module enfichable ACOPOSmulti, Interface SinCos EnDat 2.1/SSI/BiSS |
8BAC0130.000-1 | Module enfichable ACOPOSmulti, 2 sorties numériques, 50 mA, max. 62,5 kHz, 2 sorties numériques, 500 mA, max. 1,25 kHz, 2 entrées numériques 24 VDC |
8BAC0130.001-1 | Module enfichable ACOPOSmulti, 2 sorties numériques, 50 mA, max. 62,5 kHz, 4 sorties numériques, 500 mA, max 1,25 kHz |
8BAC0132.000-1 | Module enfichable ACOPOSmulti, 4 entrées analogiques ±10 V |
8BAC0133.000-1 | Module enfichable ACOPOSmulti, 3 sorties RS422 pour l'émulation de l'encodeur ABR, 1 MHz |
Shield component sets
8SCS002.0000-00 | Kit de composants pour bouclier ACOPOSmulti : 1x plaque de serrage, 2x pince D 4-13.5 mm, 2x vis |
8SCS005.0000-00 | Jeu de composants pour bouclier ACOPOSmulti : 1x couvercle de fente / plaque de blindage |
8SCS007.0000-00 | Kit de composants pour bouclier ACOPOSmulti : 1x plaque de montage du bouclier 2x 45°, 4x vis |
8SCS008.0000-00 | Jeu de composants pour bouclier ACOPOSmulti : 1x plaque de blindage 2x type 0, 1x collier de serrage, B 9 mm, D 23-35 mm |
8SCS010.0000-00 | Kit de composants de blindage ACOPOSmulti : 1x plaque de maintien ACOPOSmulti SK14-20, 1x pince de connexion de blindage SK20 |
Terminal blocks
8TB2104.203L-00 | Bornier à vis à 4 broches, 1 rangée, pas : 5,08 mm, étiquette 3 : T- T+ B- B+, codage L : 1010 |
8TB2106.2010-00 | Bornier à vis à 6 broches, 1 rangée, pas : 5,08 mm, étiquette 1 : numérotée consécutivement |
8TB2108.2010-00 | Bornier à vis à 8 broches, 1 rangée, pas : 5,08 mm, étiquette 1 : numérotée consécutivement |
8TB4104.204G-10 | Bornier à vis à 4 broches, 1 rangée, pas : 10,16 mm, étiquette 4 : PE W V U, codage G : 0110 |
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V4.6 HW Upgrade (8BVI0330HWS0.000-3) | EXE / 641 Ko | |
V4.6 HW Upgrade (8BVIxxxxxxSx.xxx-3) | EXE / 582 Ko | |
V4.6 HW Upgrade (8BVIxxxxxxSx.xxx-3) | EXE / 582 Ko | |
V6.0 HW Upgrade (8BVI0330HWS0.000-3) | EXE / 641 Ko | |
V6.0 HW Upgrade (8BVIxxxxxxSx.xxx-3) | EXE / 582 Ko |
Documentation | Version (date) | Téléchargement |
---|---|---|
Datasheet 8BVI0330HWS0.000-3 | PDF / 2 Mo |