General information
Cable construction
Connector
Type | 13-pin female speedtec hybrid motor connector |
Mating cycles | <500 |
Contacts | 13 |
Additional connectors |
9-pin male DSUB connector Mating cycles: <200 Contacts: 9 Degree of protection per EN 60529: IP20 when connected |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤13.3 Ω/km |
Supply lines | ≤26 Ω/km |
Signal line | 0.30 mm²: ≤68 Ω/km, 0.15 mm²: ≤140 Ω/km |
Insulation resistance | ≥200 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 20.2 A |
Installed in conduit or cable duct | 17.8 A |
Installed in cable tray | 20.9 A |
Référence produit:
8BCH0019.1111A-0Description:
- Can be used in cable drag chains
- Motor and encoder wires in one cable
- Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors with option "Single-cable solution (hybrid)"
- speedtec - Innovative connector system for secure connections
- Integrated shield plate
A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary.
Certifications | Version (date) | Téléchargement |
---|---|---|
EU Declaration Servos ACOPOSmulti | PDF / 219 Ko | |
UK Declaration ACOPOSmicro | PDF / 109 Ko | |
UK Declaration Servos ACOPOSmulti | PDF / 109 Ko | |
UK Declaration Servos ACOPOSmulti_8BVx1650Hxxx.000_8BVx1650Hxxx.004 | PDF / 110 Ko |
Documentation | Version (date) | Téléchargement |
---|---|---|
Datasheet 8BCH0019.1111A-0 | PDF / 273 Ko |