DWL@DWL10000642276
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
---|---|---|---|---|---|---|
1.3.0.0 | * | 24/06/2024 | 4 MB | EXE | AS4_HW_X90BC124.32-00.exe | |
Description |
V4.7 HW Upgrade (X90BC124.32-00) Revision information X90BC124.32-00 Version 1.3.0.0: ID: 783500 Unit of the ramp control is wrong when configured as "PWM with current control" When a channel is defined as "PWM with current control", the unit falsely states "0.1 ms". The correct value is "0.1 s". The Automation Help and the technical datasheet als specifies the correct value. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 788335 Improve current measurement when RMS method is used The accuracy of current measurement using the RMS method has been significantly improved. Channel description changed: No Configuration description changed: No Firmware changed: Yes Version 1.2.1.0: ID: 712935 Module documentation revised Data sheet V1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 717035 In some situations the PVG ramp configuration overrules the ramp configuration of the PWM ramp If PVG channel 25 is configured with a ramp and channel 21 is configured asPWM output, the ramp configuration of PVG channel 25 is used instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 711665 Overtemperature cutoff (at 95°C) If the module temperature exceeds the limit value of 95°C, then the module executes the following actions: - Setting the "overtemperature" error bit - All outputsare disabled Once the module temperature falls to 85°C, the error bit is automatically cleared by the module and the outputs become operational again. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Version 1.1.0.0: ID: 708205 /Support ID: 400322832 Product improvement Additional current measurement for PWM outputs with inductive load. Channel description changed: No Configuration description changed: No Firmware changed: Yes Version 1.0.1.0: ID: 598035 Support X90BC124.32-00 First Version Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.2.1.0 | * | 03/01/2023 | 4 MB | EXE | AS4_HW_X90BC124.32-00.exe | |
Description |
V4.7 HW Upgrade (X90BC124.32-00) Revision information X90BC124.32-00 Version 1.2.1.0: ID: 712935 Module documentation revised Data sheet V1.05 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 717035 In some situations the PVG ramp configuration overrules the ramp configuration of the PWM ramp If PVG channel 25 is configured with a ramp and channel 21 is configured asPWM output, the ramp configuration of PVG channel 25 is used instead. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 711665 Overtemperature cutoff (at 95°C) If the module temperature exceeds the limit value of 95°C, then the module executes the following actions: - Setting the "overtemperature" error bit - All outputs are disabled Once the module temperature falls to 85°C, the error bit is automatically cleared by the module and the outputs become operational again. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Version 1.1.0.0: ID: 708205 / Support ID: 400322832 Product improvement Additional current measurement for PWM outputs with inductive load. Channel description changed: No Configuration description changed: No Firmware changed: Yes Version 1.0.1.0: ID: 598035 Support X90BC124.32-00 First Version Channeldescription changed: No Configuration description changed: No Firmware changed: No |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.2.0.0 | * | 16/02/2021 | 4 MB | EXE | AS4_HW_X90BC124.32-00.exe | |
Description |
V4.7 HW Upgrade (X90BC124.32-00) Revision information X90BC124.32-00.32-00 Version 1.2.0.0: ID: 711665 Overtemperature cutoff (at 95°C) If the module temperature exceeds the limit value of 95°C, then the module executes the following actions: - Setting the "overtemperature" error bit - All outputs are disabled Once the module temperature falls to 85°C, the error bit is automatically cleared by the module and the outputs become operational again. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Version 1.1.0.0: ID: 708205 / Support ID: 400322832 Product improvement Additional current measurement for PWM outputs with inductive load. Channel description changed: No Configuration description changed: No Firmware changed: Yes Version 1.0.1.0: ID: 598035 Support X90BC124.32-00 First Version Channel description changed: No Configuration description changed: No Firmware changed: No |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.0.1.0 | * | 08/04/2020 | 5 MB | EXE | AS4_HW_X90BC124.32-00.exe | |
Description |
V4.7 HW Upgrade (X90BC124.32-00) Revision information X90BC124.32-00 Version 1.0.1.0: ID: 598035 Support X90BC124.32-00 First Version Channel description changed: No Configuration description changed: No Firmware changed: No |