DWL@DWL10000479956
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
---|---|---|---|---|---|---|
1.10.12.0 | * | 29/03/2022 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT842 Version 1.10.12.0: ID: 744635 Hardware error evaluation if release is constantly true. The hardware errors are now also evaluated if Release signal is constantly true. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(333) Version 1.10.11.0: ID: 710670 Timing of module internal communication updated The timing of the module internal communication was updated. Sporadic errors 98818, 119317, 99348, 102914, 99350 no longer occur. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(332) Version 1.10.10.1: ID: 692825 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692725 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692630 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(331) Version 1.10.9.2: ID: 670170 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.1: ID: 643160 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.11.0 | * | 16/04/2021 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT842 Version 1.10.11.0: ID: 710670 Timing of module internal communication updated The timing of the module internal communication was updated. Sporadic errors 98818, 119317, 99348, 102914, 99350 no longer occur. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(332) Version 1.10.10.1: ID: 692825 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692725 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692630 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(331) Version 1.10.9.2: ID: 670170 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.1: ID: 643160 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.10.1 | * | 15/12/2020 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT842 Version 1.10.10.1: ID: 692825 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692725 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692630 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(331) Version 1.10.9.2: ID: 670170 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.1: ID: 643160 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.9.2 | * | 31/01/2020 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT842 Version 1.10.9.2: ID: 670170 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.1: ID: 643160 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(330) Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59383_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59383_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.9.1 | * | 16/05/2019 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT402 Version 1.10.9.1: ID: 643160 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59372_1.fw(330) Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59372_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRTcycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if anoutput is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59372_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59372_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.9.0 | * | 08/11/2018 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT402 Version 1.10.9.0: ID: 618280 logger entry 112174, 108078 Loggerentry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59372_1.fw(330) Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 / Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default valuechanged to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59372_1.fw(327) Version 1.10.1.0: ID: 530020 firstofficial release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59372_1.fw(320) |
|||||
Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
1.10.2.2 | * | 30/11/2017 | 4 Mo | EXE | AS4_HW_X20SRT842.exe | |
Description |
V4.2 HW Upgrade (X20SRT842) Revision information X20SRT402 Version 1.10.2.2: ID: 537515 / Support ID: 400220092 Show consumed SRT cycle time Show consumed SRT cycle time Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 541770 New default values Default values for discrepancytime ans filter on changed Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 542350 /Support ID: 400221738 Correction of the Feedback evaluation Correction in the evaluation of the SO-feedbacks. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 552365 User configurable Toff filter, new default value Toff filter is now configurable to 0us. A "filter on" value of less than 1000us in combination with "Pulse Mode internal" can lead to unintended deactivation or troggling of the safe input. For existing projects this has to be verified. Default value changed to 1000us. Channel description changed: No Configuration description changed: Yes Firmware changed: Yes ID: 554670 / Support ID: 400228406 ChannelOk reset with OSSD-Signals near the SRT-Cycletime OSSD-signals similar to the SRT-cycletime cause channel errors. With the change the ChannelOk remains high and filters can be applied. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 557005 / Support ID: 400230951 Fix the output channel in combined SRT- and SC-mode Fix the out channel if an output is set by the SRT and the SC-part of the module Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 558620 Correction of the parameter download Correction of the parameter download to the SRT-module Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\59372_1.fw(327) Version 1.10.1.0: ID: 530020 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\59372_1.fw(320) |