DWL@DWL10000305091

Version Langue
Système d'exploitation
Date
Taille
Type Téléchargement
1.9.0.0 * 09/09/2024 5 Mo EXE AS4_HW_X20IF10G3-1.exe
Description V4.0 HW Upgrade (X20IF10G3-1)

Revision information X20IF10G3-1

Version 1.9.0.0:

ID: RKFY-7578
Regular firmware update
Regular firmware update
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(25), 1\42796_1.fw(13)

Version 1.8.0.0:

ID:
Adaptations for Automation Studio 4.11
Channel description changed: no
Configuration description changed: yes
Firmware changed: no

Version 1.7.0.0:

ID: 627910
Replacement of the interfacecard in AS
"Replace HW Modul" works correktly
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 690505
Module documentation revised
Data sheet V2.19
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 712190
New HWX Entry
add "Manual start of bus communication"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 712195
NEw FW V4.8.0.4/24
Update of the FW
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(24), 1\42796_1.fw(13)

Version 1.5.0.0:

ID: 512445
New Hilscher FW V4.6.0.4
internal error (0x8008) PDI watchdogtime configuration error
Channel description changed: No
Configuration descriptionchanged: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(23), 1\42796_1.fw(12)

Version 1.4.0.0:

ID: 496075
New FW with correct VendorID and ProductCode
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(22), 1\42796_1.fw(12)

Version 1.2.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(18), 1\42796_1.fw(12)

Version 1.1.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(4), 1\42796_1.fw(12)

Version 1.0.4.0:

ID: 469290
netX configuration module name can be definedfor X20IF10G3-1 in AS 4 at SGCCPU
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.3.0:

ID: 466860
FDT/DTM Cycle Time change
Change parameter name "Cycle time [µs]"to "Data exchange time (CPU-netX) [µs]"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 466865
Add ModulOK in I/O Mapping
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.2.0:

ID: 431390
Internal error 6999 when creating a project
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.1.1:

ID: 390390
Dynamic configuration
The name of the generated netX module can be freely assigned in order to enable a dynamic configuration of netX modules in AR.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.0.1:

ID: 270365
Support X20IF10G3-1
First version
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)
Version Langue
Système d'exploitation
Date
Taille
Type Téléchargement
1.8.0.0 * 23/07/2021 2 Mo EXE AS4_HW_X20IF10G3-1.exe
Description V4.0 HW Upgrade (X20IF10G3-1)

Revision information X20IF10G3-1

Version 1.8.0.0:

ID:
Adaptations for Automation Studio 4.11
Channel description changed: no
Configuration description changed: yes
Firmware changed: no

Version 1.7.1.0:

ID: 721900
Expansion: Operation behind an X20(c)EM* possible
The module can now also be operated on an X20(c)EM*
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(24), 1\42796_1.fw(13)

Version 1.7.0.0:

ID: 627910
Replacement of the interfacecard in AS
"Replace HW Modul" works correktly
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 690505
Module documentation revised
Data sheet V2.19
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 712190
New HWX Entry
add "Manual start of bus communication"
Channel description changed: No
Configuration description changed: Yes
Firmwarechanged: No

ID: 712195
NEw FW V4.8.0.4/24
Update of the FW
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(24), 1\42796_1.fw(13)

Version 1.5.0.0:

ID: 512445
New Hilscher FW V4.6.0.4
internal error (0x8008) PDI watchdogtime configuration error
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(23), 1\42796_1.fw(12)

Version 1.4.0.0:

ID: 496075 / Support ID: 400196482, 400196463
New FW with correct VendorID and ProductCode
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(22), 1\42796_1.fw(12)

Version 1.2.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(18), 1\42796_1.fw(12)

Version 1.1.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(4), 1\42796_1.fw(12)

Version 1.0.4.0:

ID: 469290
netX configuration module name can be defined for X20IF10G3-1 in AS 4 at SGC CPU
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.3.0:

ID: 466860
FDT/DTM Cycle Time change
Change parameter name "Cycle time [µs]" to "Data exchange time (CPU-netX) [µs]"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 466865
Add ModulOK in I/O Mapping
Channel descriptionchanged: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.2.0:

ID: 431390
Internal error 6999 when creating a project
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.1.1:

ID: 390390
Dynamic configuration
The name of the generated netX module can be freely assigned in order to enable a dynamic configuration of netX modules in AR.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.0.1:

ID: 270365
Support X20IF10G3-1
First version
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)
Version Langue
Système d'exploitation
Date
Taille
Type Téléchargement
1.7.0.0 * 14/12/2020 2 Mo EXE AS4_HW_X20IF10G3-1.exe
Description V4.0 HW Upgrade (X20IF10G3-1)

Revision information X20IF10G3-1-1

Version 1.7.0.0:

ID: 627910
Replacement of the interfacecard in AS
"Replace HW Modul" works correktly
Channel description changed:No
Configuration description changed: Yes
Firmware changed: No

ID: 690505
Module documentation revised
Data sheet V2.19
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 712190
New HWX Entry
add "Manual start of bus communication"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 712195
NEw FW V4.8.0.4/24
Update of the FW
Channel description changed:No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(24), 1\42796_1.fw(13)

Version 1.5.0.0:

ID: 512445
New Hilscher FW V4.6.0.4
internal error (0x8008) PDI watchdogtime configuration error
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(23), 1\42796_1.fw(12)

Version 1.4.0.0:

ID: 496075 / Support ID: 400196482, 400196463
New FW with correct VendorID and ProductCode
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(22), 1\42796_1.fw(12)

Version 1.2.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(18), 1\42796_1.fw(12)

Version 1.1.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(4), 1\42796_1.fw(12)

Version 1.0.4.0:

ID: 469290
netX configuration module name can be defined for X20IF10G3-1 in AS 4at SGCCPU
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.3.0:

ID: 466860
FDT/DTM Cycle Time change
Change parameter name "Cycle time [µs]" to "Data exchange time (CPU-netX) [µs]"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 466865
Add ModulOK in I/O Mapping
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.2.0:

ID: 431390
Internalerror 6999 when creating a project
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware:1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.1.1:

ID: 390390
Dynamic configuration
The name of the generated netX module can befreely assigned in order to enable a dynamic configuration of netX modules inAR.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.0.1:

ID: 270365
Support X20IF10G3-1
First version
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)
Version Langue
Système d'exploitation
Date
Taille
Type Téléchargement
1.5.0.0 * 22/12/2016 996 Ko EXE AS4_HW_X20IF10G3-1.exe
Description V4.0 HW Upgrade (X20IF10G3-1)

Revision information X20IF10G3-1

Version 1.5.0.0:

ID: 512445
New Hilscher FW V4.6.0.4
internal error (0x8008) PDI watchdogtime configuration error
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(23), 1\42796_1.fw(12)

Version 1.4.0.0:

ID: 496075 / Support ID: 400196482, 400196463
New FW with correct VendorID and ProductCode
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(22), 1\42796_1.fw(12)

Version 1.2.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress inFLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(18), 1\42796_1.fw(12)

Version 1.1.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmwarechanged: Yes
Firmware: 1\42796a1.fw(4), 1\42796_1.fw(12)

Version 1.0.4.0:

ID: 469290
netX configuration module name can be defined for X20IF10G3-1 in AS 4 at SGC CPU
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.3.0:

ID: 466860
FDT/DTM Cycle Time change
Change parameter name "Cycle time [µs]" to "Data exchange time (CPU-netX) [µs]"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 466865
Add ModulOK in I/O Mapping
Channel description changed:No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.2.0:

ID: 431390
Internal error 6999 when creating a project
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.1.1:

ID: 390390
Dynamic configuration
The name of the generated netX module can be freely assigned in order to enable a dynamic configuration of netX modules in AR.
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.0.1:

ID: 270365
Support X20IF10G3-1
First version
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)
Version Langue
Système d'exploitation
Date
Taille
Type Téléchargement
1.4.0.0 * 13/09/2016 985 Ko EXE AS4_HW_X20IF10G3-1.exe
Description V4.0 HW Upgrade (X20IF10G3-1)

Revision information X20IF10G3-1

Version 1.4.0.0:

ID: 496075 / Support ID: 400196482, 400196463
New FW with correct VendorID and ProductCode
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(22), 1\42796_1.fw(12)

Version 1.2.0.0:

ID: 483035
Module documentation revised
Data sheet V1.22
Channel description changed: No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(18), 1\42796_1.fw(12)

Version 1.1.0.0:

ID: 483035
Moduledocumentation revised
Data sheet V1.22
Channel description changed:No
Configuration description changed: No
Firmware changed: No

ID: 487230
New FW V4.5.0.2
Saving the 2nd Slaveaddress in FLASH
Channel description changed: No
Configuration description changed: No
Firmware changed: Yes
Firmware: 1\42796a1.fw(4), 1\42796_1.fw(12)

Version 1.0.4.0:

ID: 469290
netX configuration module name can be defined for X20IF10G3-1 in AS 4 at SGC CPU
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.3.0:

ID: 466860
FDT/DTM Cycle Time change
Change parameter name "Cycle time [µs]" to "Data exchange time (CPU-netX) [µs]"
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No

ID: 466865
Add ModulOK in I/O Mapping
Channel description changed: No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.2.0:

ID: 431390
Internal error 6999 when creating a project
Channel description changed: No
Configuration description changed: No
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.1.1:

ID: 390390
Dynamic configuration
The name of the generated netX module can be freely assigned in order to enable a dynamic configuration of netX modules in AR.
Channel description changed:No
Configuration description changed: Yes
Firmware changed: No
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)

Version 1.0.0.1:

ID: 270365
Support X20IF10G3-1
First version
Channel description changed: Yes
Configuration description changed: Yes
Firmware changed: Yes
Firmware: 1\42796a1.fw(17), 1\42796_1.fw(12)
Loading
Retour à la liste

Veuillez sélectionner un pays et une langue

B&R Logo