DWL@DWL10000258802
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.4.0.0 | * | 23/07/2021 | 786 Ko | EXE | AS4_HW_X20IF1030.exe | |
| Description |
V4.0 HW Upgrade (X20IF1030) Revision information X20IF1030 Version 1.4.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.3.0.0: ID: 718865 Resolvepotential boot issue In rare cases it could happen that the module is not reliably identified during bootup. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(11), 1\7976_4.pci(14) Version 1.2.1.0: ID: 668180 Support HW-variant4 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 683090 / Support ID: 400314137 Error elimination of the spurious interrupts which sometimes caused a SERVICE mode on the Compact CPUs Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(11), 1\7976_4.pci(13) Version 1.1.7.0: ID: 241840 Updated online help, AS4 EcadData added Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.6.1: ID: 236375 Added "ModulOk" data point in HWX Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.5.3: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGX cpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2),1\7976_3.pci(4) Version 1.1.5.2: ID: 295460 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.4.0: ID: 247765 Error correction in the FPGA UART implementation Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(2), 1\7976_3.pci(1) Version 1.1.2.0: ID: 191305 Enhancement internal function reboot behaviour after FW update Enhancement internal function reboot behaviour after FW update Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(1) Version 1.1.1.0: ID: 183680 New diagnostic data points New diagnosticdata points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) Version 1.1.0.0: ID: 175505 Module supported on SGC targets Module supported on SGC targets, new HW variant 1 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.3.0.0 | * | 16/03/2021 | 784 Ko | EXE | AS4_HW_X20IF1030.exe | |
| Description |
V4.0 HW Upgrade (X20IF1030) Revision information X20IF1030 Version 1.3.0.0: ID: 718865 Resolve potential boot issue In rare cases it could happen that the module is not reliably identified during bootup. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(11), 1\7976_4.pci(14) Version 1.2.1.0: ID: 668180 Support HW-variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 683090 / Support ID: 400314137 Error elimination of the spurious interrupts which sometimes caused a SERVICE mode on the Compact CPUs Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(11), 1\7976_4.pci(13) Version 1.1.7.0: ID: 241840 Updated online help, AS4 EcadData added Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.6.1: ID: 236375 Added "ModulOk" data point in HWX Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.5.3: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGX cpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.5.2: ID: 295460 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.4.0: ID: 247765 Error correction in the FPGA UART implementation Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(2), 1\7976_3.pci(1) Version 1.1.2.0: ID: 191305 Enhancement internal function reboot behaviour after FW update Enhancement internal function reboot behaviour after FW update Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(1) Version 1.1.1.0: ID: 183680 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) Version 1.1.0.0: ID: 175505 Module supported on SGC targets Module supported on SGC targets, new HW variant 1 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.2.1.0 | * | 16/09/2020 | 782 Ko | EXE | AS4_HW_X20IF1030.exe | |
| Description |
V4.0 HW Upgrade (X20IF1030) Revision information X20IF1030 Version 1.2.1.0: ID: 668180 Support HW-variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 683090 / Support ID: 400314137 Error elimination of the spurious interrupts which sometimes caused a SERVICE mode on the CompactCPUs Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(11), 1\7976_4.pci(13) Version 1.1.7.0: ID: 241840 Updated online help, AS4 EcadData added Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.6.1: ID: 236375 Added "ModulOk" data point in HWX Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.5.3: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGX cpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.5.2: ID: 295460 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.4.0: ID: 247765 Error correction in the FPGA UART implementation Channel description changed:No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(2), 1\7976_3.pci(1) Version 1.1.2.0: ID: 191305 Enhancement internal functionreboot behaviour after FW update Enhancement internal function reboot behaviour after FW update Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(1) Version 1.1.1.0: ID: 183680 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) Version 1.1.0.0: ID: 175505 Module supported on SGC targets Module supported on SGC targets, new HW variant 1 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.7.0 | * | 12/02/2016 | 719 Ko | EXE | AS4_HW_X20IF1030.exe | |
| Description |
V4.0 HW Upgrade (X20IF1030) Revision information X20IF1030 Version 1.1.7.0: ID: 241840 Updated online help, AS4 EcadData added Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.6.1: ID: 236375 Added "ModulOk" data point in HWX Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.5.3: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGXcpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.5.2: ID: 295460 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5),1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.4.0: ID: 247765 Error correction in the FPGA UART implementation Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(2), 1\7976_3.pci(1) Version 1.1.2.0: ID: 191305 Enhancement internalfunction reboot behaviour after FW update Enhancement internal function reboot behaviour after FW update Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(1) Version 1.1.1.0: ID: 183680 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) Version 1.1.0.0: ID: 175505 Module supported on SGC targets Module supported on SGC targets, new HW variant 1 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.1.6.0 | * | 11/11/2013 | 423 Ko | EXE | AS4_HW_X20IF1030.exe | |
| Description |
V4.0 HW Upgrade (X20IF1030) Revision information X20IF1030 Version 1.1.6.0: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGX cpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 354870 Internal optimisation for usage on an ATOM CPU (X20CPx58x) The receive idle time (RIT) for frame end identification can be increased correctly to 5 to 12 characters. - AR: F4.06 or higher necessary Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(6), 1\7976_2.pci(2), 1\7976_3.pci(5) Version 1.1.5.3: ID: 350925 / Support ID: 400109677 Connection possibilities in hardware designer revised. Module can be projected with SGX cpu in hardware designer of Automation Studio 4. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.5.2: ID: 295460 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(5), 1\7976_2.pci(2), 1\7976_3.pci(4) Version 1.1.4.0: ID: 247765 Error correction in the FPGA UART implementation Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(2), 1\7976_3.pci(1) Version 1.1.2.0: ID: 191305 Enhancement internal function reboot behaviour after FW update Enhancement internal function reboot behaviour after FW update Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2), 1\7976_2.pci(1) Version 1.1.1.0: ID: 183680 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) Version 1.1.0.0: ID: 175505 Module supported on SGC targets Module supported on SGC targets, new HW variant 1 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7976_0.pci(2), 1\7976_1.pci(2) |
|||||
