DWL@DWL10000158496
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
|---|---|---|---|---|---|---|
| 1.20 | * | DOS | 12/11/2010 | 458 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0120.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP300/400 User Manual) 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.20 / 2010-10-11 ---------------------------------------------------------------- Contents: 0020#0.bio 1.20 NEW 0020#1.bio 1.20 NEW LXFLASH.EXE 3.02 LIESMICH.TXT 1.20 NEW README.TXT 1.20 NEW CONFIG.SYS AUTOEXEC.BAT SAVBIOS.BAT UPDBIOS.BAT Fixes: - Following VGA modes are shifted horizontal right with 8 pixels (1 sign): VGA Mode 11h 640*480*2 [MCGA, VGA 2 colours] VGA Mode 12h 640*480*16 [VGA 16 colours] Changes: - None. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.19 | * | DOS | 30/06/2009 | 460 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0119_.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP300/400 User Manual) 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.19 / 2009-06-15 ---------------------------------------------------------------- Contents: 0020#0.bio 1.19 NEW 0020#1.bio 1.19 NEW LXFLASH.EXE 3.02 LIESMICH.TXT 1.19 NEW README.TXT 1.19 NEW CONFIG.SYS AUTOEXEC.BAT SAVBIOS.BAT UPDBIOS.BAT Fixes: - BIOS: Bugfix regarding network problems on PP300/400 devices: At high network load and BIOS versions smaller V1.19 it can be possible, that on certain PP300/400 devices the network connection is lost (for device containment see B&R web history). Connections via VNC or Terminal application will be interrupted and can only be rebuilt by rebooting the PP300/400 device. Theoretically, there can also be failures with aPCI cards. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.18 | * | DOS | 08/09/2008 | 460 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0118.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.18 / 2008-09-08 / WIH ---------------------------------------------------------------- Contents: 0020#0.bio 1.18 NEW 0020#1.bio 1.18 NEW LXFLASH.EXE 3.02 LIESMICH.TXT 1.18 NEW README.TXT 1.18 NEW CONFIG.SYS AUTOEXEC.BAT SAVBIOS.BAT UPDBIOS.BAT Fixes: - BIOS: Several power fail restarts or resets within the BIOS initialization phase (before summary screen) forced to automatically load the BIOS setup defaults. This behaviour only occurred with BIOS V1.17 and is fixed with BIOS V1.18. Changes: - BIOS: Optimizations for detecting several bootable USB devices in combination with USB Media Drive (timeouts increased). |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.17 | * | DOS | 27/08/2008 | 459 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0117.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.17 / 2008-08-27 ---------------------------------------------------------------- Contents: 0020#0.bio 1.17 NEW 0020#1.bio 1.17 NEW LXFLASH.EXE 3.02 LIESMICH.TXT 1.17 NEW README.TXT 1.17 NEW CONFIG.SYS AUTOEXEC.BAT SAVBIOS.BAT UPDBIOS.BAT Fixes: - BIOS: Bugfix for detecting/booting CDs via USB Media Drive, timeout for slower drives increased. Changes: - BIOS: Facilitating the entry into the BIOS setup pages, waiting time for [DEL] entries increased to 500ms. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.16 | * | DOS | 25/03/2008 | 459 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0116.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.16 / 2008-03-19 ---------------------------------------------------------------- Contents: 0020#0.bio 1.16 NEW 0020#1.bio 1.16 NEW LXFLASH.EXE 3.02 LIESMICH.TXT 1.16 NEW README.TXT 1.16 NEW CONFIG.SYS AUTOEXEC.BAT SAVBIOS.BAT UPDBIOS.BAT Changes: - BIOS: Text modification (Video and Flat Panel Configuration, "TFT" to "Flat Panel"). - BIOS: Implementation USB Boot functionality in AR Mode at Mode/Node switch position "00". |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.15 | * | DOS | 13/04/2015 | 762 Ko | ZIP | UPG_PP500_APC500_BIOSUS15W_V0115.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- UPGRADE PROCEDURE ---------------------------------------------------------------- 1. Extract the *.zip file and copy the files to a bootable disc or e.g. USB Memorystick. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP500 User Manual) 2. Insert the disk into the floppy drive and reboot the system (or boot from e.g. USB Memorystick). 3. After the reboot there will be displayed a bootmenu with follow options: 1. Upgrade BIOS (PP500, - BIOS will be upgraded APC510/511) (Default after 5 sec). 2. Exit - Exit to Shell (MS-DOS). 4. After successful upgrade the system must be rebooted. 5. Press "F2" to enter BIOS Setup and load CMOS Defaults after REBOOT. After this select "Save Changes and Exit". ---------------------------------------------------------------- Version 01.15 / 03/18/2015 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.15 NEW README.txt 01.15 NEW CONFIG.sys 01.00 AUTOEXEC.bat 01.00 MTCXSVC.exe 10.20 0032#0.bio 01.15 NEW PRGBIOS.bat 01.00 Change(s) 0032#0.bio (BIOS f. PP500, APC510/511): - BIOS messages for setup entry or boot manager are shown in the upper left corner. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.14 | * | DOS | 26/02/2015 | 761 Ko | ZIP | UPG_PP500_APC500_BIOSUS15W_V0114.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- UPGRADE PROCEDURE ---------------------------------------------------------------- 1. Extract the *.zip file and copy the files to a bootable disc or e.g. USB Memorystick. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP500 User Manual) 2. Insert the disk into the floppy drive and reboot the system (or boot from e.g. USB Memorystick). 3. After the reboot there will be displayed a bootmenu with follow options: 1. Upgrade BIOS (PP500, - BIOS will be upgraded APC510/511) (Default after 5 sec). 2. Exit - Exit to Shell (MS-DOS). 4. After successful upgrade the system must be rebooted. 5. Press "F2" to enter BIOS Setup and load CMOS Defaults after REBOOT. After this select "Save Changes and Exit". ---------------------------------------------------------------- Version 01.14 / 02/09/2015 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.14 NEW README.txt 01.14 NEW CONFIG.sys 01.00 AUTOEXEC.bat 01.00 MTCXSVC.exe 10.20 NEW 0032#0.bio 01.14 NEW PRGBIOS.bat 01.00 Change(s) 0032#0.bio (BIOS f. PP500, APC510/511): - Power On timing optimized for 12in SVGA display. - Bugfix: with incorrect SD configuration, it was possible to lock the BIOS. MTCXSVC: - Support/Enhancements for PPC900 and AP9x3/9xD. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.13 | * | DOS | 11/06/2007 | 457 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0113.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.13 ---------------------------------------------------------------- Contents: 0020#0.bio 1.13 NEW 0020#1.bio 1.13 NEW LXFLASH.EXE 3.02 NEW Fixes: - None. Changes: - LXFLASH.EXE: Newest version. - BIOS: The version of the Factory Settings will be shown in the Setup pages now. - BIOS: Text modifications (battery, power management). |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.12 | * | 12/03/2007 | 456 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0112.zip | |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS (autoselect) => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.12 ---------------------------------------------------------------- Contents: 0020#0.bio 1.12 NEW 0020#1.bio 1.12 NEW LXFLASH.EXE 3.01 NEW CONFIG.SYS NEW Fixes: - None. Changes: - LXFLASH.EXE: Newest version. - CONFIG.SYS: Text optimizations for QVGA devices. - BIOS: The MAC address is now shown in the setup pages. - BIOS: QVGA BIOS setup pages are now in graphics mode and thereby readable. - BIOS: Diverse text, colour and format modifications (especially for QVGA devices). |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.11 | * | 01/03/2007 | 456 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0111.zip | |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (into directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.11 ---------------------------------------------------------------- Contents: 0020#0.bio 1.11 NEW 0020#1.bio 1.11 NEW - BIOS: Bugfix in configuring brightness and contrast parameters. Those parameters were configured wrong during booting. - BIOS: Bugfix in IRQ routing. The interrupts for the aPCI cards are now assigned correctly. - BIOS: Bugfix in USB Legacy section. Problems with blocked keyboards are now fixed. Changes: - BIOS: Preparation for AR SRAM handling (burst mode). - BIOS: Preparation for booting AR (canceled AR BIOS extension). |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.10 | * | DOS | 28/02/2013 | 758 Ko | ZIP | UPG_PP500_APC500_BIOSUS15W_V0110.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- UPGRADE PROCEDURE ---------------------------------------------------------------- 1. Extract the *.zip file and copy the files to a bootable disc or e.g. USB Memorystick. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP500 User Manual) 2. Insert the disk into the floppy drive and reboot the system (or boot from e.g. USB Memorystick). 3. After the reboot there will be displayed a bootmenu with follow options: 1. Upgrade BIOS (PP500, - BIOS will be upgraded APC510/511) (Default after 5 sec). 2. Exit - Exit to Shell (MS-DOS). 4. After successful upgrade the system must be rebooted. 5. Press "F2" to enter BIOS Setup and load CMOS Defaults after REBOOT. After this select "Save Changes and Exit". ---------------------------------------------------------------- Version 01.10 / 25.01.2013 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.10 NEW README.txt 01.10 NEW CONFIG.sys 01.00 AUTOEXEC.bat 01.00 MTCXSVC.exe 08.10 NEW 0032#0.bio 01.10 NEW PRGBIOS.bat 01.00 Change(s) 0032#0.bio (BIOS f. PP500, APC510/511): - Help texts adjusted and extended. - New BIOS IDE driver, which supports now the INTEL SSD 520 series at APC510. MTCXSVC: - Enhancements for APC910 and AP830. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.09 | * | DOS | 20/12/2006 | 453 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0109.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (into directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.09 ---------------------------------------------------------------- Contents: 0020#0.bio 1.09 NEW 0020#1.bio 1.09 NEW Fixes: - BIOS: Bugfix in AR mode, the BIOS Extension will be started now after the NMI initalization. Changes: - None. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.08 | * | DOS | 12/12/2006 | 454 Ko | ZIP | PP300_400_BIOS_Upgrade_Disk_V0108.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- GENERAL INFORMATION ---------------------------------------------------------------- You can update or save the BIOS a B&R Power Panel 300/400 with this software. ---------------------------------------------------------------- UPDATE PROCEDURE ---------------------------------------------------------------- 1. Copy all files to a bootable disk. 2. Insert the disk in a (USB) floppy drive connected to the Power Panel and re-boot the device. 3. A boot menu with following options is shown after booting: 1. Update BIOS => default after 5 sec The BIOS will be updated automatically. *********************************************** Write down your BIOS settings before upgrading! *********************************************** After a BIOS update the BIOS uses automatically the CMOS default settings. If you have changed settings in the BIOS Setup you must change these settings again after update! *************************** Do not abort a BIOS update! *************************** Otherwise the Power Panel cannot be rebooted afterwards and must be sent to B&R for repair. Retry the aborted update process WITHOUT rebooting the Power Panel, for example by directly calling batch file UPDBIOS.BAT. 2. Save BIOS (into directory SAVED) The BIOS will be saved automatically in the directory SAVED. *********************************************************** There must be about 256 kbytes free space left on the disk. *********************************************************** 3. Exit Exit to the Shell (MS-DOS). 4. Select the desired action. 5. Remove disk and reboot device (after successful update only!). ---------------------------------------------------------------- Version 1.08 ---------------------------------------------------------------- Contents: 0020#0.bio 1.08 NEW 0020#1.bio 1.08 NEW Fixes: - None. Changes: - BIOS: Support of 64MB RAM modules. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.05 | * | DOS | 07/07/2004 | 475 Ko | ZIP | Power_Panel_100_BIOS_Upgrade_V01_05.zip |
| Description |
BIOS Upgrade BIOS Upgrade for B&R Power Panel 100 devices with BIOS (5PP120.0571-27, 5PP120.1043-37 and 5PP120.1505-37). Further information about the BIOS Update see the readme files! Fixes - If a FPGA or aPCI module was not present, status "Wrong FPGA file" was shown, even when a FPGA file was burned in the Flash. - Fixed hangup at reboot after error at reading Factory Settings. - MDMA mode is now supported for CF card. Changes - New FPGA firmware file 5718_0.pci. - Utility XFLASH.EXE with improved User Boot Logo support, new update mode and changed info output. - XFLASH clears now CMOS settings and CMOS backup after BIOS upgrade. - New code base Dorado 1.18j used: a) Core Version changed from V3.2.5 to 3.55GX1. b) VSA Version changed from 0203 to 0204. c) New Setup parameters "DMA/UDMA support in BIOS" and "Max PIO/MDMA/UDMA mode for Compact Flash". d) New Setup parameters "Refresh Interval", "Refresh Stagger" and "SMM Mapping". e) "Aggressive" Memory Timings added. - FPGA firmware boot sequence has been improved. - CMOS Setup: a) New FPGA status "Boot disabled". b) Automatic screen update of temperature values added. c) Drive Info for CF Card added. d) Menu layout changed. - Summary Screen: a) Minor layout changes (User Serial ID, SMC version, Floppy). b) Info output for drive 80 ("CF Card") enhanced: Additionally the used addressing mode (CHS, LBA) and transfer mode (PIO, MDMA) are shown. f) Info output for on-board FPGA and aPCI slots added. - Memory timing improved: default mode is now "Conservative". "Auto" mode renamed to "Optimized". - CMOS Setup and Summary Screen adapted for QVGA. - SVGA display timings improved. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.04 | * | DOS | 07/07/2004 | 413 Ko | ZIP | Power_Panel_100_BIOS_Upgrade_V01_04.zip |
| Description |
BIOS Upgrade BIOS Upgrade for B&R Power Panel 100 devices with BIOS (5PP120.0571-27, 5PP120.1043-37 and 5PP120.1505-37). Further information about the BIOS Update see the readme files! Fixes: - Text corrections in batch and readme files. - The Power Panel resets now the CMOS values to the default settings after three instead of four faulty boot-ups. - The Hardware ID of an aPCI module in slot 2 was not shown in the Setup. Changes: - New flash utility XFLASH.EXE with improved aPCI and FPGA support. - FPGA.ROM replaced by 5751_1.PCI. - Only FPGA files burned with XFLASH V1.02 are supported. - Factory Settings version is shown in Summary Screen. - "Clear Memory" can be specified with "Enabled/Disabled" instead count of MBytes. If enabled the BIOS clears the complete memory always. - After restoring the CMOS from the CMOS backup the checksum of the CMOS values is checked again. This avoids setting the CMOS values with the CMOS backup from any other BIOS version. - If Legacy USB is disabled, the USB status is shown as "Legacy OFF" in the Summary Screen. |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.03 | * | DOS | 07/07/2004 | 360 Ko | ZIP | Power_Panel_100_BIOS_Upgrade_V01_03.zip |
| Description | BIOS Upgrade | |||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 1.00 | * | DOS | 10/04/2012 | 744 Ko | ZIP | UPG_PP500_APC500_BIOSUS15W_V0100.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- UPGRADE PROCEDURE ---------------------------------------------------------------- 1. Extract the *.zip file and copy the files to a bootable disc or e.g. USB Memorystick. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP500 User Manual) 2. Insert the disk into the floppy drive and reboot the system (or boot from e.g. USB Memorystick). 3. After the reboot there will be displayed a bootmenu with follow options: 1. Upgrade BIOS (PP500, - BIOS will be upgraded APC510/511) (Default after 5 sec). 2. Exit - Exit to Shell (MS-DOS). 4. After successful upgrade the system must be rebooted. 5. Press "F2" to enter BIOS Setup and load CMOS Defaults after REBOOT. After this select "Save Changes and Exit". ---------------------------------------------------------------- Version 01.00 / 14.03.2012 / !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.00 NEW README.txt 01.00 NEW CONFIG.sys 01.00 NEW AUTOEXEC.bat 01.00 NEW MTCXSVC.exe 06.6.2 0032#0.bio 01.00 NEW PRGBIOS.bat 01.00 NEW Change(s) 0032#0.bio (BIOS f. PP500, APC510/511): - PCIExpress driver load optimized (for IF-Cards). - Remote Control Support for devices without graphics. - Support for new display resolutions (WXGA). |
|||||
| Version | Langue | Système d'exploitation | Date | Taille | Type | Téléchargement |
| 0.20 | * | DOS | 23/04/2012 | 744 Ko | ZIP | UPG_PP500_APC500_BIOSUS15W_V0020.zip |
| Description |
BIOS Upgrade ---------------------------------------------------------------- UPGRADE PROCEDURE ---------------------------------------------------------------- 1. Extract the *.zip file and copy the files to a bootable disc or e.g. USB Memorystick. (Alternatively, a bootable CompactFlash card or a bootable USB stick can be used. Detailed information can be found in the PP500 User Manual) 2. Insert the disk into the floppy drive and reboot the system (or boot from e.g. USB Memorystick). 3. After the reboot there will be displayed a bootmenu with follow options: 1. Upgrade BIOS (PP500, - BIOS will be upgraded APC510/511) (Default after 5 sec). 2. Exit - Exit to Shell (MS-DOS). 4. After successful upgrade the system must be rebooted. 5. Press "F2" to enter BIOS Setup and load CMOS Defaults after REBOOT. After this select "Save Changes and Exit". ---------------------------------------------------------------- Version 00.20 / 18.11.2011 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 00.20 NEW README.txt 00.20 NEW CONFIG.sys 00.20 NEW AUTOEXEC.bat 00.20 NEW MTCXSVC.exe 06.6.2 NEW 0032#0.bio 00.20 NEW PRGBIOS.bat 00.20 NEW Change(s) 0032#0.bio (BIOS f. PP500): - Bugfix: Resource conflict with Legacy Devices, if the IO-APIC mode is disabled (necessary e.g. for WinCE and ARemb). MTCXSVC: - Enhancements for PP500/APC510/APC511 series. |
|||||
