Short description
I/O module | 4 safe type A digital inputs, 4 pulse outputs, 24 VDC |
General information
Safety characteristics
I/O power supply
Nominal voltage | 24 VDC |
Voltage range | 24 VDC -15% / +20% |
Integrated protection | Reverse polarity protection |
Safe digital inputs
Pulse outputs
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | 0 to 2000 m, no limitation |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | 0 to 60°C |
Vertical mounting orientation | 0 to 50°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x safety-keyed terminal block separately. Order 1x safety-keyed bus module (single-width) separately. |
Pitch | 12.5+0.2 mm |
Número de material:
X20SI4110Descripción:
- 4 safe digital inputs
- 4 pulse outputs
- Sink circuit
- Software input filter configurable for each channel
- Single-width module
This single-width module is equipped with 4 safe digital inputs. It is designed for a nominal voltage of 24 VDC.
The module can be used to read various digital signals in safety-related applications up to PL e or SIL 3.
The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line.
This module is designed for X20 12-pin terminal blocks.
Accesorios obligatorios
Bus modules
Terminal blocks
X20TB52 | X20 terminal block, 12-pin, safety-keyed |
Actualizaciones de hardware de Automation Studio | Versión (fecha) | Descargar |
---|---|---|
V4.0 HW Upgrade (X20SI4110) | EXE / 2 MB | |
V4.6 HW Upgrade (X20SI4110) | EXE / 2 MB | |
V6.0 HW Upgrade (X20SI4110) | EXE / 2 MB |
Certificados | Versión (fecha) | Descargar |
---|---|---|
E115267 UL CoC X20 | PDF / 1 MB | |
FS Certificate SafeDESIGNER, SafeLOGIC, SafeIO | PDF / 1 MB | |
FS Certificate mapp Safety | PDF / 1 MB | |
FTZU 09 ATEX 0083X | PDF / 771 KB |
Documentación | Versión (fecha) | Descargar |
---|---|---|
Data sheet X20(c)SIx1x0 - mapp Safety | PDF / 3 MB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 Package leaflet ATEX/CSA | PDF / 2 MB | |
X20 System User´s Manual | PDF / 7 MB |
Herramientas/Utilidades/Ejemplos | Versión (fecha) | Descargar |
---|---|---|
Sistema library | ZIP / 336 KB |