General information
Number of hard disks | 2 |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD |
Controller
Type | SiI 3512 SATA link |
Specification | Serial ATA 1.0 |
Data transfer rate | Max. 1.5 Gbit/s (150 MB/s) |
RAID level | Supports RAID 0, 1 |
BIOS extension ROM requirements | Approx. 32 kB |
Hard disk
Capacity | 250 GB |
Number of heads | 1 |
Number of sectors | 488,397,168 |
Bytes per sector | 512 |
Cache | 8 MB |
Speed | 5400 rpm ±0.2% |
Startup time | Typ. 3.6 s (from 0 rpm to read access) |
S.M.A.R.T. support | Yes |
Access time | 5.56 ms |
Supported transfer modes |
SATA 1.0, serial ATA revision 2.6 PIO mode 0-4, multiword DMA mode 0-2, UDMA mode 0-6 |
Data transfer rate | |
Internal | Max. 1175 Mbit/s |
To/From host | Max. 150 MB/s |
Positioning time | |
Minimum (track to track) | 1 ms |
Nominal (read access) | 14 ms |
Maximum (read access) | 30 ms |
Electrical properties
Power consumption |
0.3 A at 3.3 V (PCI bus) 1 A at 5 V (PCI bus) |
Ambient conditions
Vendor information
Manufacturer | Seagate |
Manufacturer's product ID | ST9250315AS |
Material number:
5ACPCI.RAIC-05Description:
- SATA RAID controller
- RAID level 0 (striped) and 1 (mirrored)
- 2 SATA hard disk drives (suitable for 24-hour operation)
- Only requires 1 PCI slot
- Transfer rates up to 150 MB/s
This SATA RAID controller supports RAID level 0 and 1 and can be inserted in a PCI slot. The 250 GB hard disks that are used are specified for 24-hour operation (24x7).
Optional Accessories
Drives
5MMHDD.0250-00 | 250 GB SATA hard disk replacement part for 5AC801.HDDI-03 and 5ACPCI.RAIC-05, note: Refer to the manual for using the hard disk. |