General information
Status display | Green LED (DC OK), threshold value Uout = 21.5 V |
Insulation voltages | |
Input - Output |
3 kV AC (type test) 3 kV AC (routine test) |
Active DC OK switch output | 24 V, 20 mA |
Connection type | Screw terminal |
Connection cross section | |
Wire end sleeves | Flexible cables require wire end sleeves in order to fulfill EN 62368 / UL 60950 |
Flexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
Inflexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
Wire stripping length | 7 mm (input/output) |
Certifications | |
CE | Yes |
UKCA | Yes |
UL |
cULus E123528 Industrial control equipment |
Input
Nominal input voltage | 100 to 240 VAC |
Input voltage |
AC 85 to 264 V (wide range), 45 to 65 Hz DC 90 to 350 V |
Input current |
Approx. 1.3 A (120 VAC) Approx. 0.8 A (230 VAC) |
Inrush current limiting | <20 A (typical) |
I2t | <2.1 A2s |
Power failure bypass |
>20 ms (120 VAC) >100 ms (230 VAC) |
Switch-on time | <0.4 s |
Protective circuit | Transient surge protection with varistor |
Internal fuse | 3.15 A slow-blow |
Required line fuse for line protection |
6 A 10 A 16 A (characteristic B) |
Output
Nominal voltage | 24 VDC ±1% |
Output power | 96 W |
Setting range for output voltage | 22.5 to 28.5 VDC |
Output current | |
-25 to 40°C | 5.0 A |
40 to 60°C | 4.0 A |
>60°C | Derating: 2.5% per °C |
Current limiting | Approx. 9 A (for short circuit) |
Control deviation |
<1% (static load change 10 to 90%) <3% (dynamic load change 10 to 90%) <0.1% (input voltage change ±10%) |
Rise time | 0.3 ms (UOUT (10 to 90%)) |
Residual ripple | <100 mVpp (at nominal values) |
Switching peaks | <100 mVSS (at nominal values) |
Can be connected in parallel | Yes, to establish redundancy and increase capacity |
Can be connected in series | Yes |
Max. capacitive load | Unlimited |
Protection against internal overvoltages | Yes, limited to approximately 35 VDC |
Protection functions | Output protected against continuous short circuit, open circuit and overload |
Power back immunity | Max. 35 VDC |
Output noise suppression | Device complies with EN 55011 (class B) |
Efficiency, reliability
Efficiency | >88% (at 230 VAC and nominal values) |
MTBF | >500,000 h, per IEC 61709 (SN 29500) |
Power dissipation | |
Rated load | Max. 12 W |
No-load operation | Max. 2.5 W |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | No |
Installation elevation above sea level | |
Maximum | 3000 m |
Ventilation/Cooling | Normal convection, no fan required |
Degree of protection per EN 60529 | IP20 |
Protection class | ΙΙ (in closed control cabinet) |
Ambient conditions
Temperature | |
Operation | -25 to 70°C (>60°C derating) |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | Max. 95%, non-condensing |
Vibration | |
Operation |
<15 Hz, amplitude ±2.5 mm, per IEC 68-2-6 15 to 150 Hz, 2.3 g |
Shock | |
Operation | 30 g in all directions, per IEC 68-2-27 |
Pollution degree | 2, per EN 50178 |
Climate category | 3K3, per EN 60721 |
Mechanical properties
Housing | |
Material | Polyamide PA, color green |
Installation | Easy top-hat rail installation (NS 35 rails, EN 60715) |
Dimensions | |
Width | 67.5 mm |
Height | 99 mm |
Depth | 114.5 mm |
Weight | 400 g |
Material number:
0PS1040.0Description:
- 100 to 240 VAC wide-range input
- Power boost for reliable startup of demanding loads (up to 5 A)
- Can be connected in parallel for increased capacity and redundancy
- Active DC OK switch output
- Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
- International certification package
- Wide temperature range from -25 to 70°C
- Extra slender design
Certificates | Version (Date) | Download |
---|---|---|
EU Declaration Power supplies | PDF / 128 KB |
Documentation | Version (Date) | Download |
---|---|---|
Datasheet 0PS1040.0 | PDF / 507 KB | |
Installation- / EMC-Guide | PDF / 20 MB |
General | Version (Date) | Download |
---|---|---|
Power Supply Statement-Directive 2009/125/EC | PDF / 20 KB |
M-CAD (Mechan. Templates) | Version (Date) | Download |
---|---|---|
3D file DXF/STEP 0PS1040.0 | ZIP / 270 KB |