General information
Encoder inputs
Quantity | 1 |
Module-side connection | 15-pin male DSUB connector |
Status indicators | UP/DN LEDs |
Electrical isolation | |
Encoder - ACOPOSmulti | No |
Encoder monitoring | Yes |
Max. encoder cable length | 75 m |
Sine/Cosine inputs | |
Signal transmission | Differential signals, symmetrical |
Signal frequency (-3 dB) | DC up to 300 kHz |
Signal frequency (-5 dB) | DC up to 400 kHz |
Common-mode voltage | Max. ±7 V |
Terminating resistor | 120 Ω |
Resolution | 12-bit |
Encoder power supply
Synchronous serial interface
Signal transmission | RS485 |
Data transfer rate | 781.25 kbit/s |
Ambient conditions
Temperature | |
Operation | |
Nominal | 5 to 40°C |
Maximum | 55°C |
Storage | -25 to 55°C |
Transport | -25 to 70°C |
Relative humidity | |
Operation | 5 to 85% |
Storage | 5 to 95% |
Transport | Max. 95% at 40°C |
Materiálové číslo:
8BAC0120.000-1Popis:
- EnDat 2.1 encoder interface for installation in ACOPOSmulti modules
- Encoder monitoring
- High-precision analog signal processing
- Embedded parameter chip when used with B&R motors
Volitelné příslušenství
EnDat 2.1 cables
8BCE0005.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 5 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
8BCE0007.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 7 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
8BCE0010.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 10 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
8BCE0015.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 15 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
8BCE0020.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 20 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
8BCE0025.1111A-0 | ACOPOSmulti EnDat 2.1 cable, length 25 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin female speedtec EnDat connector, 15-pin male DSUB servo connector, can be used in cable drag chains |
Automation Studio HW Upgrades | Verze (datum) | Ke stažení |
---|---|---|
V4.0 HW Upgrade (8BAC0120.000-1) | EXE / 194 KB | |
V6.0 HW Upgrade (8BAC0120.000-1) | EXE / 555 KB |
Dokumentace | Verze (datum) | Ke stažení |
---|---|---|
ACOPOSmulti User´s Manual | PDF / 302 MB | |
Datasheet 8BAC0120.000-1 | PDF / 2 MB |
E-CAD (Electro or EPLAN Templates) | Verze (datum) | Ke stažení |
---|---|---|
ACOPOSmulti EPLAN P8 from V2.4 | EXE / 81 MB |
M-CAD (Mechan. Templates) | Verze (datum) | Ke stažení |
---|---|---|
3D file STEP 8BAC0120.000-1 | ZIP / 374 KB |