DWL@DWL10000316314
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.1.1.0 | * | 16.02.2023 | 526 KB | EXE | AS4_HW_5AP93D.240C-01.exe | |
Popis |
V4.0 HW Upgrade (5AP93D.240C-01) Revision information 5AP93D.240C-01 Version 2.1.1.0: ID: 765755 / Support ID: 400397919 Bugfixerror 7121 Missing configuration-enties in terminal-mode added Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.1.0.0: ID: Adaptations forAutomation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 2.0.0.0: ID: 674025 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP9xD are recommended, mixed operation of the current andolder HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 APC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 AP9xD panels: V2.0.0.0 5DLSDL.1002-00: V2.0.0.0 5DLSD3.1003-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 674030 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677760 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC isstarting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix forthe module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 409885 Revised terminal configuration The parameter "Use Type" (current use types of the module: in Panel PC 2100or Automation Panel) has to be set depending on the usage of the display unitin a terminal configuration. In follow it is possible to make the correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 409890 Support of Panel PC 2100 in display units with swing arm Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.1.0: ID: 402340 Correction for the support of the resistive touch Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 376920 Support for 5AP92D.1505-00 TheAutomation Panel 92D is supported with Automation Studio V4.0.17.x. Note for ARemb: Correct calibration per default is available only with VisualComponents V4.05.6 AND the latest upgrade of used system unit (e.g. 5PC901.TS77-0x,5PC910.SX0x-00, 5PC810.SX0x-00, 5PC51x.SX01-00 ). If necessary it must be recalibrated. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.1.0.0 | * | 26.07.2021 | 210 KB | EXE | AS4_HW_5AP93D.240C-01.exe | |
Popis |
V4.0 HW Upgrade (5AP93D.240C-01) Revision information 5AP93D.240C-01.240C-01 Version 2.1.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration descriptionchanged: yes Firmware changed: no Version 2.0.0.0: ID: 674025 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP9xD are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 APC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 AP9xDpanels: V2.0.0.0 5DLSDL.1002-00: V2.0.0.0 5DLSD3.1003-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 674030 EPLAN Datenimplemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677760 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 414010 Revised terminal configuration The parameter "Use Type" (current use types of the module: in Panel PC 2100or Automation Panel) has to be set depending on the usage of the display unitin a terminal configuration. In follow it is possible to make the correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414145 Support of Panel PC 2100 in display units with swing arm Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 376860 Support for 5AP93D.240C-01 The Automation Panel 93D is supported with Automation Studio V4.0.17.x. The touch is supported in Automation Runtime embedded with version E4.06 and Visual Components V4.05.5. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.0 | * | 08.04.2020 | 207 KB | EXE | AS4_HW_5AP93D.240C-01.exe | |
Popis |
V4.0 HW Upgrade (5AP93D.240C-01) Revision information 5AP92D.1505-00 Version 2.0.0.0: ID: 674025 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for allcomponents (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP9xD are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 APC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 AP9xD panels: V2.0.0.0 5DLSDL.1002-00: V2.0.0.0 5DLSD3.1003-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 674030 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677760 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can beconfigured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID:409885 Revised terminal configuration The parameter "Use Type" (current use types of the module: in Panel PC 2100or Automation Panel) has to be set depending on the usage of the display unitin a terminal configuration. Infollow it is possible to make the correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmwarechanged: No ID: 409890 Support of Panel PC 2100 in display units with swing arm Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.1.0: ID: 402340 Correction for the support of the resistive touch Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 376920 Support for5AP92D.1505-00 The Automation Panel 92D is supported with Automation Studio V4.0.17.x. Note for ARemb: Correct calibration per default is availableonly with Visual Components V4.05.6 AND the latest upgrade of used system unit (e.g. 5PC901.TS77-0x, 5PC910.SX0x-00, 5PC810.SX0x-00, 5PC51x.SX01-00 ). If necessary it must be recalibrated. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.5.0.0 | * | 12.09.2017 | 267 KB | EXE | AS4_HW_5AP93D.240C-01.exe | |
Popis |
V4.0 HW Upgrade (5AP93D.240C-01) Revision information 5AP923.1215-00 Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit ofa Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the servicemode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INAnode number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.1.0: ID: 374245 / Support ID: 400142426, 400152825 Correction in the hardware descrption file The upload of the hardwareworks within the ARwin from versions: -T4.06, -H4.09, -M4.10, -G4.25 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.0.0: ID: 406010 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407130 Revised terminal configuration The parameter "Use Type" (currently Use Types of the module: in Panel PC 900, Panel PC 2100 or Automation Panel) has to be set depending on the usageof the display unit in a terminal configuration. In follow it is possible to make the correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407145 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.5.0: ID:402955 ARemb is booting up cyclically at Panel PC 900 With upgrade version V1.3.0.0 ARemb is booting up cyclically at Panel PC 900. This problem is solved. Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: No Version 1.3.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSD3.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 399370 Preparation to support new targets Channel description changed: No Configuration description changed:Yes Firmware changed: No Version 1.2.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.1.0: ID: 385450 Graphics driver issue with the Panel PC 900 as a windows terminal server The use of a PanelPC 900 as a Windows terminal server has caused problems with the graphics driver. With an additional parameter in the hardware description file this problem is solved. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 385485 Preparation to support new targets Channel description changed: No Configurationdescription changed: No Firmware changed: No Version 1.1.0.0: ID: 373110 Support for 5AP923.1215-00 The display unit is supported with Automation Studio V4.0.17.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |