DWL@DWL10000605823
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.0.1.0 | * | 15.06.2023 | 526 KB | EXE | AS4_HW_5AP1130.0702-000.exe | |
Popis |
V4.0 HW Upgrade (5AP1130.0702-000) Revision information 5AP1130.0702-000 Version 2.0.1.0: ID: 770795 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 672960 Extensions Hypervisorfrom AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 672965 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677790 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configuredvia the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 636490 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 575160 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 426725 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 545590 / Support ID: 400224680 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.3.0: ID: 509880 Dimensions adapted The Automation Panel is now shown correctly in the system designer. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.2: ID: 458960 Correction in the hardware descrption file Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.1: ID: 452385 Graphics was shown deformed in the System Designer of the Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 437605 Support for 5AP1120.0573-000 The display unit for Automation Panel 1000 is supported with Automation Studio V4.0.17.x. Thedisplay unit for Panel PC 2100 is supported with Automation Studio V4.1.4.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.0 | * | 08.04.2020 | 206 KB | EXE | AS4_HW_5AP1130.0702-000.exe | |
Popis |
V4.0 HW Upgrade (5AP1130.0702-000) Revision information 5AP1120.0573-000 Version 2.0.0.0: ID: 672960 Extensions Hypervisor fromAR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used forall components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixedoperation of the current and older HWX upgrades is not recommended: APC910system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 672965 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677790 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC isactiv from Automation Runtime version C4.34. The supervision at the usage as display unit ofa Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 636490 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 575160 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 426725 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 545590 / Support ID: 400224680 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.3.0: ID: 509880 Dimensions adapted The Automation Panel is now shown correctly in the system designer. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.2: ID: 458960 Correction in the hardware descrption file Channel description changed: No Configurationdescription changed: No Firmware changed: No Version 1.0.0.1: ID: 452385 Graphics was shown deformed in the System Designer of the Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 437605 Support for 5AP1120.0573-000 The display unit for Automation Panel 1000 is supported with Automation Studio V4.0.17.x. The display unit for Panel PC 2100 is supported with Automation Studio V4.1.4.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.4.0.0 | * | 16.07.2019 | 223 KB | EXE | AS4_HW_5AP1130.0702-000.exe | |
Popis |
V4.0 HW Upgrade (5AP1130.0702-000) Revision information 5AP1120.0573-000 Version 1.4.0.0: ID: 636490 Preparation to support thePanel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 575160 Preparation to support the SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.0.0: ID: 426725 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 545590 / Support ID: 400224680 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.3.0: ID: 509880 Dimensions adapted The Automation Panel is now showncorrectly in the system designer. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.2: ID: 458960 Correction in the hardware descrption file Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.1: ID: 452385 Graphics was shown deformed in the System Designer of the Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.0.0.0: ID: 437605 Support for 5AP1120.0573-000 The display unit for Automation Panel 1000 is supported with Automation Studio V4.0.17.x. The display unit for Panel PC 2100 is supported with Automation Studio V4.1.4.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |