DWL@DWL10000318445
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
1.25 | * | 13.09.2022 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0125_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.25 / 07/12/2022 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.25 NEW README.txt 01.25 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 19.52 NEW 58658_0.fw 01.25 NEW 58659_0.fw 01.25 NEW 58660_0.fw 01.25 NEW 58648_0.fw 01.25 NEW 58693_0.fw 01.25 NEW 58694_0.fw 01.25 NEW 58695_0.fw 01.25 NEW 58696_0.fw 01.25 NEW 58699_0.fw 01.25 NEW 58701_0.fw 01.25 NEW 60115_0.fw 01.25 NEW 60116_0.fw 01.25 NEW 60117_0.fw 01.25 NEW 60118_0.fw 01.25 NEW 60119_0.fw 01.25 NEW 60683_0.fw 01.25 NEW 60684_0.fw 01.25 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Support for new HW monitor types. - Internal changes/optimizations for the function test. MTCXSVC: - Minor optimizations and bug fixes. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.22 | * | 24.08.2021 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0122_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.22 / 07/02/2021 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.22 NEW README.txt 01.22 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 19.40 NEW 58658_0.fw 01.22 NEW 58659_0.fw 01.22 NEW 58660_0.fw 01.22 NEW 58648_0.fw 01.22 NEW 58693_0.fw 01.22 NEW 58694_0.fw 01.22 NEW 58695_0.fw 01.22 NEW 58696_0.fw 01.22 NEW 58699_0.fw 01.22 NEW 58701_0.fw 01.22 NEW 60115_0.fw 01.22 NEW 60116_0.fw 01.22 NEW 60117_0.fw 01.22 NEW 60118_0.fw 01.22 NEW 60119_0.fw 01.22 NEW 60683_0.fw 01.22 NEW 60684_0.fw 01.22 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Optimization of the communication interface to the local display (only applies to PPC2100). MTCXSVC: - Support for MPC3100 family. - Support for SDL4T extended update (LINKIFILE). ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.21 | * | 06.06.2019 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0121_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.21 / 04/26/2019 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.21 NEW README.txt 01.21 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 17.43 58658_0.fw 01.21 NEW 58659_0.fw 01.21 NEW 58660_0.fw 01.21 NEW 58648_0.fw 01.21 NEW 58693_0.fw 01.21 NEW 58694_0.fw 01.21 NEW 58695_0.fw 01.21 NEW 58696_0.fw 01.21 NEW 58699_0.fw 01.21 NEW 58701_0.fw 01.21 NEW 60115_0.fw 01.21 NEW 60116_0.fw 01.21 NEW 60117_0.fw 01.21 NEW 60118_0.fw 01.21 NEW 60119_0.fw 01.21 NEW 60683_0.fw 01.21 NEW 60684_0.fw 01.21 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Bugfix: Sporadically, incorrect key codes are generated by an internal panel keyboard of a customized Automation Panel. The key and LED matix is not affected by this behavior. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.14 | * | 14.02.2019 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0114_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.14 / 12/04/2018 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.14 NEW README.txt 01.14 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 17.43 NEW 58658_0.fw 01.14 NEW 58659_0.fw 01.14 NEW 58660_0.fw 01.14 NEW 58648_0.fw 01.14 NEW 58693_0.fw 01.14 NEW 58694_0.fw 01.14 NEW 58695_0.fw 01.14 NEW 58696_0.fw 01.14 NEW 58699_0.fw 01.14 NEW 58701_0.fw 01.14 NEW 60115_0.fw 01.14 NEW 60116_0.fw 01.14 NEW 60117_0.fw 01.14 NEW 60118_0.fw 01.14 NEW 60119_0.fw 01.14 NEW 60683_0.fw 01.14 NEW 60684_0.fw 01.14 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Optimized internal keyboard syncronization. MTCXSVC: - Support for xPC2200 family. - Support for SDL4 converter. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.13 | * | 27.04.2018 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0113_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.13 / 03/15/2018 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.13 NEW README.txt 01.13 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 16.10 58658_0.fw 01.13 NEW 58659_0.fw 01.13 NEW 58660_0.fw 01.13 NEW 58648_0.fw 01.13 NEW 58693_0.fw 01.13 NEW 58694_0.fw 01.13 NEW 58695_0.fw 01.13 NEW 58696_0.fw 01.13 NEW 58699_0.fw 01.13 NEW 58701_0.fw 01.13 NEW 60115_0.fw 01.13 NEW 60116_0.fw 01.13 NEW 60117_0.fw 01.13 NEW 60118_0.fw 01.13 NEW 60119_0.fw 01.13 NEW 60683_0.fw 01.13 NEW 60684_0.fw 01.13 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Bugfix: Extension units for AP5000 are not recognized sporadically. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.10 | * | 14.06.2017 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0110_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.10 / 04/24/2017 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.10 NEW README.txt 01.10 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.40 58658_0.fw 01.10 NEW 58659_0.fw 01.10 NEW 58660_0.fw 01.10 NEW 58648_0.fw 01.10 NEW 58693_0.fw 01.10 NEW 58694_0.fw 01.10 NEW 58695_0.fw 01.10 NEW 58696_0.fw 01.10 NEW 58699_0.fw 01.10 NEW 58701_0.fw 01.10 NEW 60115_0.fw 01.10 NEW 60116_0.fw 01.10 NEW 60117_0.fw 01.10 NEW 60118_0.fw 01.10 NEW 60119_0.fw 01.10 NEW 60683_0.fw 01.10 NEW 60684_0.fw 01.10 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Support for 5ACCIF01.FSS0-000. - Support syncronization byte for BRADI interface over several OS systems. - Optimized RTC syncronization. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.08 | * | 12.10.2016 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0108_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.08 / 08/31/2016 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.08 NEW README.txt 01.08 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.40 58658_0.fw 01.08 NEW 58659_0.fw 01.08 NEW 58660_0.fw 01.08 NEW 58648_0.fw 01.08 NEW 58693_0.fw 01.08 NEW 58694_0.fw 01.08 NEW 58695_0.fw 01.08 NEW 58696_0.fw 01.08 NEW 58699_0.fw 01.08 NEW 58701_0.fw 01.08 NEW 60115_0.fw 01.08 NEW 60116_0.fw 01.08 NEW 60117_0.fw 01.08 NEW 60118_0.fw 01.08 NEW 60119_0.fw 01.08 NEW 60683_0.fw 01.08 NEW 60684_0.fw 01.08 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw, 60683_0.fw, 60684_0.fw (MTCX Firmware): - Support for 5PPC2100.BY48-00x variants. - Bugfix: customized 4-wire touch. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.07 | * | 31.03.2016 | 4 MB | ZIP | UPG_PPC2100_MTCX_V0107_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.07 / 02/12/2016 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.07 NEW README.txt 01.07 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.40 58658_0.fw 01.07 NEW 58659_0.fw 01.07 NEW 58660_0.fw 01.07 NEW 58648_0.fw 01.07 NEW 58693_0.fw 01.07 NEW 58694_0.fw 01.07 NEW 58695_0.fw 01.07 NEW 58696_0.fw 01.07 NEW 58699_0.fw 01.07 NEW 58701_0.fw 01.07 NEW 60115_0.fw 01.07 NEW 60116_0.fw 01.07 NEW 60117_0.fw 01.07 NEW 60118_0.fw 01.07 NEW 60119_0.fw 01.07 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw, 60115_0.fw, 60116_0.fw, 60117_0.fw, 60118_0.fw, 60119_0.fw (MTCX Firmware): - Support for customer spezific IF card. - Support for 5PPC2100.BYxx-002 variants. - Bugfix: Run Led was not cleared in standby mode. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.06 | * | 07.01.2016 | 3 MB | ZIP | UPG_PPC2100_MTCX_V0106_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.06 / 11/20/2015 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.06 NEW README.txt 01.06 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.40 NEW 58658_0.fw 01.06 NEW 58659_0.fw 01.06 NEW 58660_0.fw 01.06 NEW 58648_0.fw 01.06 NEW 58693_0.fw 01.06 NEW 58694_0.fw 01.06 NEW 58695_0.fw 01.06 NEW 58696_0.fw 01.06 NEW 58699_0.fw 01.06 NEW 58701_0.fw 01.06 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw (MTCX Firmware): - Support for 5ACCIF01.ICAN-000. - Bugfix: AP5000 Key Extensions. MTCXSVC: - Support for AP1000 and AP5000 display units. - Using the options "I" and "ALL" a system report is shown. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.03 | * | 11.06.2015 | 2 MB | ZIP | UPG_PPC2100_MTCX_V0103_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.03 / 05/13/2015 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.03 NEW README.txt 01.03 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.10 58658_0.fw 01.03 NEW 58659_0.fw 01.03 NEW 58660_0.fw 01.03 NEW 58648_0.fw 01.03 NEW 58693_0.fw 01.03 NEW 58694_0.fw 01.03 NEW 58695_0.fw 01.03 NEW 58696_0.fw 01.03 NEW 58699_0.fw 01.03 NEW 58701_0.fw 01.03 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw (MTCX Firmware): - Support for Panels with external backlight LED driver (e.g.: AP1000). ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.02 | * | 13.04.2015 | 2 MB | ZIP | UPG_PPC2100_MTCX_V0102_EFI.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.02 / 03/10/2015 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.02 NEW README.txt 01.02 NEW STARTUP.nsh 01.00 MTCXPPC2100.nsh 01.00 MTCXSVC.efi 12.10 NEW 58658_0.fw 01.02 NEW 58659_0.fw 01.02 NEW 58660_0.fw 01.02 NEW 58648_0.fw 01.02 NEW 58693_0.fw 01.02 NEW 58694_0.fw 01.02 NEW 58695_0.fw 01.02 NEW 58696_0.fw 01.02 NEW 58699_0.fw 01.02 NEW 58701_0.fw 01.02 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw (MTCX Firmware): - HW calibration changed for TS on PPC2100 to optimize production prozess (no impact for customer). - Power ON behaviour optimized for next generation AP1000 (especially for 7in model). - Bugfix: customized 4-wire touch. MTCXSVC: - Support for SDL3 Converter Box (5COSD3.1000-00). - Optimization memory usage. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.00 | * | 17.12.2014 | 2 MB | ZIP | UPG_PPC2100_MTCX_V0100.zip | |
Popis |
PPC2100 Firmware Upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade of the MTCX is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.00 / 11/27/2014 !MANDATORY UPDATE! ---------------------------------------------------------------- Contents LIESMICH.txt 01.00 NEW README.txt 01.00 NEW CONFIG.sys 01.00 NEW AUTOEXEC.bat 01.00 NEW MTCXSVC.exe 10.20 58658_0.fw 01.00 NEW 58659_0.fw 01.00 NEW 58660_0.fw 01.00 NEW 58648_0.fw 01.00 NEW 58693_0.fw 01.00 NEW 58694_0.fw 01.00 NEW 58695_0.fw 01.00 NEW 58696_0.fw 01.00 NEW 58699_0.fw 01.00 NEW 58701_0.fw 01.00 NEW PRGMTCX.bat 01.00 NEW Change(s) 58658_0.fw, 58659_0.fw, 58660_0.fw, 58648_0.fw, 58693_0.fw, 58694_0.fw, 58695_0.fw, 58696_0.fw, 58699_0.fw, 58701_0.fw (MTCX Firmware): - Bugfix: Legacy CAN. ATTENTION! Possible upgrade problems and version dependency, see above. |